Advertisement
Quick Links
Advertisement
Summary of Contents for Waterstars Waterstars Storm
- Page 1 User Manual V 1.3 2014/07/02...
- Page 2 +36305676424. 3. Installation The installation of any Waterstars instrument is very easy. Just stick the velcro to the bottom of the instrument, fix the T-bar or to the footstretcher with the screws or the double sided tape included in the package, stick the other side of the velcro on the T-Bar, and you can just place the Waterstars to the console.
- Page 3 4. Operation 4.1 Switch on/off and the menu system Waterstars Storm has touch buttons to ensure the best user experience and long life of the instrument by eliminating moving components. The touch buttons are the screws on the front face of the device.
- Page 4 The coach mode is useful for coaches to measure the stroke rate, and split times by using Waterstars Basic. The timer starts by touching the down button. To measure the actual stroke rate, the down bottom must be touched at the beginning (or any other certain part) of each stroke.
- Page 5 Down Button: Decrease backlight Logging Waterstars can save the measured data (time, acceleration, stroke rate, speed and GPS coordinates) of any training for further analysis. On default, the intervals are saved to the internal memory in separate files. In case of full trainings With the Enter Button, then the system returns a message: „Now logging!”...
- Page 6 Heart Rate Sensor Waterstars Storm can be equipped with two type of heart rate sensor: a 5.3kHz and the ANT+ protocol. You can decide which mode to us according to the heart rate strap you have, or what kind of measurement would you like to carry out.