Download Print this page

MicroImage Video Systems MIR540 Operation Manual

Video mirror controller

Advertisement

Quick Links

MicroImage Video Systems warrants that each MIR540 is free from
defects due to faulty materials or improper workmanship for a period of
one (1) year. MicroImage Video Systems further warrants that any part
which proves defective in materials or workmanship within one (1) year,
will be replaced or repaired at no cost to the user. Labor to replace
defective parts will be done without charge, provided the equipment is
returned to MicroImage Video Systems prepaid, insured and properly
packaged. Prior return authorization must be obtained from MicroImage
Video Systems.
NOTE
This warranty covers the MicroImage MIR540 only.
CONDITIONS
This warranty is void if the warranted part has been altered or subjected
to abuse or misuse. Defective parts must be returned to MicroImage
Video Systems.
SOLE WARRANTY
This Warranty is in lieu of all other warranties expressed or implied
including, without limitation, any implied warranty or any implied
warranty of fitness for a particular purpose. MicroImage Video Systems
shall have the final right to determination as to the existence and cause of
any defect and its appropriate adjustment in accordance with the terms of
this warranty. In no event shall MicroImage Video Systems be liable for
any consequential or collateral damages.
All returns MUST have an RMA number. Please call, fax or email
for an RMA form. The RMA form will have the proper shipping
address for returns.
Phone
610-754-6800
Fax
610-754-9766
Email
techsupport@mivs.com
WARRANTY
RETURNS
Page 8
Video Mirror
Controller
Operation Manual
Model MIR540
MicroImage Video Systems
division of World Video Sales Co., Inc
PO Box 331
Boyertown, PA 19512
Phone 610-754-6800
Fax 610-754-9766
sales@mivs.com
www.mivs.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the MIR540 and is the answer not in the manual?

Questions and answers

Summary of Contents for MicroImage Video Systems MIR540

  • Page 1 In no event shall MicroImage Video Systems be liable for any consequential or collateral damages.
  • Page 2 4ft. 2 wire, 1.3mm female coaxial barrel connector RETURNS.................8 Size 3.2" x 1.8" x 1.2" (82mm x 46mm x 31mm) Weight 2.6 oz (74g) The MIR540 is manufactured in the USA by MicroImage Video Systems. Rev 0 03-06-2008, Reviewed 07-06-2015 Page 2 Page 7...
  • Page 3 RS232 REMOTE CONTROL DESCRIPTION The MIR540 can be controlled or queried by a computer or process The MIR540 is designed to reverse the video image in either the controller via the wired RS232 interface. The MIR540 uses a horizontal, the vertical or both directions. Each input channel may simple protocol to communicate with the host system.
  • Page 4 SIGNAL STANDARD SELECTION OPERATIONS The MIR540 controller MUST be set to the proper video standard Once connected properly, the MIR540 is easy to use. Following is to work correctly. The choices are NTSC (RS170/60Hz) or PAL a description of each switch and control.