Panasonic KT4 series Instruction Manual page 3

3.2 External dimensions (Unit: mm)
48
3.3 Panel cutout (Unit: mm)
+0.5
45
0
3.4 CT (Current transformer) external dimensions (Unit: mm)
AKT4815 (for 5A, 10A, 20A)
3.5 Mounting
Mount the controller vertically to fulfill the Dust-proof/Drip-proof specification (IP66).
Mountable panel thickness: 1 to 15mm
Insert the controller from the front side of the panel.
Attach the mounting brackets by the holes at the top and bottom of the case and secure the controller
in place with the screws.
4. Wiring
Warning
Turn the power supply to the instrument off before wiring or checking it.
Working or touching the terminal with the power switched on may result in severe
injury or death due to Electric Shock.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Gasket A
11.5
(Fig. 3.2-1)
(Fig. 3.3-1)
(Fig.3.5-1)
Screw typ e mounting bracket
95
101 (*)
+0.5
n x 48-3
0
Caution: If lateral close mounting is used for the controller ,
IP66 specification may be compromised, and
warranties will be invalidated.
AKT4816 (for 50A)
(Fig. 3.4-1)
A s the case is made of resin, do
not use excessive force while
s c r e w i n g i n t h e m o u n t i n g
bracket, or the case or screw
type mounting bracket could be
damaged.
The torque is approximately
0.12N•m.
Terminal cover
(*) Terminal cover (AKT4801)
Lateral close mounting
n: Number of unit s mounted
Warning
all