Setup Menu - RCA 27F524T User Manual

Using the TV's Menu System
SETUP
Go Back
Auto Ch. Search < > ...
List & Labels
Closed Caption
Favorite CH
Language
Format
AUTO CHANNEL SEARCH
Go Back
Signal Type
Start
Search Percent
Analog Channel
Digital Channel
LISTS AND LABELS
Go Back
< >
Channel
Label
In list


Setup Menu

Auto Channel Search Allows you to choose your signal type and begin
an Auto Channel Search.
...
...
Press the left or right arrow button to choose among the signal sources
...
below:
English...
4:3
• Antenna If you have connected an antenna to the ANTENNA/
• Cable
Cable...
Running...
20%
8 Found
0 Found
After you have made the selections above, press the down arrow button
to highlight Start.
• Start Press the right arrow button to start the search. Searches
• Search percent Number displayed indicates how much of the
• Analog Channels Shows the number of analog channels found as
• Digital Channels Shows the number of digital channels found as
List & Labels Edit the channels in the list or choose labels for each
channel. Select Lists & Labels from the SETUP menu and press the right or
left arrow button.
10...
• Channel Press the right or left arrow button to select the channel
• Label For example, if channel 12 has the call letters WXYZ, you
1. Press the right arrow button to highlight the first space.
2. Use the number buttons on your remote to spell out your new label.
3. Move spaces with the right and left arrow buttons.
4. Use the up arrow button to highlight Go Back and press OK to exit
CABLE INPUT, choose Antenna. Refer to page 5 for a complete
explanation of these connections.
If you have connected cable to the ANTENNA/CABLE
INPUT, choose Cable. Depending on which package you have you
can receive analog, digital or both stations. Refer to page 5 for a
complete explanation of these connections.
for channels the TV is receiving and stores them in the channel list.
This step can take some time, depending on your content provider.
The Lists & Labels menu is displayed. Go to page 11 (Auto Channel
Search) for more information.
search has been completed on analog and digital signals.
they are being searched. These are searched for first.
they are being searched. These are searched for last.
number that you want to give a label. Press the down arrow button
to highlight Label.
can use this feature to label it WXYZ so it appears on-screen as part
of the Channel Banner.
For example, above the number button 7 is the label PQRS. The
letter P is typed by pressing the number 7 button one time; the letter
Q is typed by pressing the number 7 two times; the letter R is three
times and the letter S is four times.
this menu when you have finished.
Chapter