Sanyo VHR-230 Instruction Manual page 13

Timer recording enables you
to set up to 6 programmed to
be recorded
upon a period of up to 1 year.
Cl Before setting the timer recording programme, be sure that
th&present displayed time and date are correct.
O Tmer programming can also be performed while it is
displayed on the TV screen. (See
"On-screen display" on
page 14.)
Example: To record a programme on channel position
5
from 21:30 to 23:15 on December 24,1993.
Press the PROG button.
The timer programming mode is then activated, to
return to the normal mode press the PROG button
again.
Set the channel position number using the numeric
buttons, for single channel number
(Example: "57,
press the [0/AVj button first.
Set the date on which the recording has to take place.
Example:
For December 24 (24/12) press the numeric
buttons [2] + [4]+ [1]+ [2], when completed the
"OK"'
indicator will start flashing, press then the OK
button.
.. . .. . . . . . . . . . . ..
. .w .. . . . . . . . . . . . . . . . .... .. . . .... . . . . . .. . . . . .. . .... j
~> >
<
"-..— ..—-...
".-....._ . ..—..-..f
j
Set the time at which the recording has to start.
(ON-time)
Example:
For 21:30, press the numeric buttons
[2] +
[1]+
[3]+ [0/A~, when completed the
"OK"
indicator will start flashing, press then the OK button.
Set the time at which the recording has to end.
(OFF-time)
Example:"For 23:15,
press the numeric buttons
[2] + [3]+ [1]+ [5], when completed the(~)
indicator will start flashing.
O
By
pressing the
SP/LP button, you can select the recording
speed
SP or LP.
When in LP mcde, the "f-~" indicator is displayed.
... (VHR-250 only)
./—------------
--3
Press the ( ? ) button.
The preset data is sent to the VCR and it will be
displayed for a 3-second period.
Auto-timer stand-by
When the preset
data
has been transmitted to the VCR, the
(21) indicator will light and the VCR goes into timer stand-by
mode.
\
..
0 By repeating
steps to E, up
to 6 different timer
programmed can be preset.
\
12