Troubleshooting - Morphy Richards Redefine 131000 Instruction Manual

Redefine hot water dispenser
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Troubleshooting

If Water Tank Icon (12) flashes
The tank may be empty OR have insufficent water to heat
the selected amount.
The sound effects have turned
themselves on.
If sound is switched off, and your hot water dispense is
unplugged, (or there is a power cut), the next time it is
switched on the sound effects will be reactivated.
Hot Water Dispenser will not heat when woken from
standby.
If the Water Tank Icon (12) is not flashing and the
Dispense Icon (13) is lit. The Hot Water Dispenser has
remaining water in the heating chamber that must be
dispensed before a new heating process can be started.
The Hot Water Dispenser will not switch on, there is
no response.
If the product is plugged in and switched on at the socket
but there is no power.
The Hot Water Dispenser is not
dispensing the correct amounts.
The pipes or Dispense Nozzles (6) may be blocked.
The Auto Dispense Icon is not lit
after heating, no water has been
dispensed..
The Auto Dispense feature is not enabled OR you are trying
to heat more than 600ml.
Solution
Fill the Water Tank with water.
Check the Water Tank is fitted correctly.
If this does not work check the Water Level Sensor (22)
on the rear of the Water Tank is not stuck in the down
position. Lightly tap to loosen.
Solution
Turn the sound effects off. To do so, press and hold the
Temperature Button (4) for 2 seconds.
Solution
Press the Dispense Button (5) to empty the chamber
into a suitable vessel.
OR
Reheat any water remaining in the chamber by pressing
the Start/Stop Button (1).
Solution
Check your main fuse box has not tripped.
Reset the fuse if it has.
Check the electrical socket with a product you know is
working, such as a lamp.
Replace the fuse in the Hot Water Dispenser plug
(13amp fuse).
Solution
Descale your Hot Water Dispenser (see page 9).
Check there are no blockages in the Dispense
Nozzles (6). (WARNING - Water remaining in the Nozzles
may be HOT).
Solution
Press the Dispense Button to dispense the water that
has just been heated.

g

f

d

e

i

q

t


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents