Multiple indoor unit (including Multi‐Zone) Applications
• Each indoor unit must have its own Intesis Wi‐Fi
module to manage each zone independently in one
account.
Room 1
Room 3
Multiple indoor unit Application: Steps to Register New (additional)
Devices
1) In your IntesisHome account click on the settings option
3) Click on Add a Facility. Fill all information needed then Click on the
(+)
plus sign
Click
Click
Room 2
Room 4
2) Click on Devices
Click
• Room 1
• Room 2
• Room 3
• Room 4
X
: Do not install Wired Wi‐Fi
module onto the Branch box
Central remote controller
terminal block
48 HFI
4) Fill and verify code. Code is located on the
device or in the products box. Follow the same
procedure if you have more than one module in
your installation.
Branch Box
Branch Box
X
Branch Box
Click