7
Device will blink in the following sequence:
*Note:
If the Wi‐Fi device is not connecting to your Wi‐Fi network. Please re‐check the following
and start from step one.
• Check Wi-Fi Signal Strength
• Check if internet service is active (Connect to Wi-Fi network with smart phone to verify the internet connection is working)
• Make sure you are selecting the right network.
• Make sure you are entering your network password properly (Case sensitive)
After Verifying these points:
1)
Press and hold for
10seconds and
release the back
button on the
device.
8
Go to web site
https://user.intesishome.com/login
Note*
Confirm the IntesisHome Email before moving to step 8b.
8b
Click
https://user.intesishome.com/login
8c
IntesisHome
Download
application from:
Setting up
2)
Registering
8a
New user: The picture above
will automatically ask to add a
device.
Done!
3) Go back to Step number One and
start again
LED turns solid green
Fill form to create account.
Registration number is located in the
back of the physical Wi‐Fi device, Box or
manual.
Once the device is register. You are
now ready to control your system.
IOS
Android
Sign in with your new
account and enjoy
controlling your Fujitsu
system!