Voltage Specification; Connecting Power Supply - Flash FLM-1500+ RE II User Manual

5.1

Voltage specification

Input Voltage
110~240V
5.2

Connecting power supply

The connection is performed using power cable (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
www.flash-butrym.pl
Total Power
1320W
Frequency
50/60Hz
4