Mac allister MAC 3.5PWA Operator's Manual
Mac allister MAC 3.5PWA Operator's Manual

Mac allister MAC 3.5PWA Operator's Manual

1800 psi upright pressure washer

Advertisement

Upright Pressure Washer
Operator's Manual
WARNING
Before using this product, read this manual and
follow all Safety Rules and Operating Instructions.
Questions? Help is just a moment away!
Call your technical helpline at 0845 300 2577.
Model No. 020271-0 (1800 PSI Pressure Washer) Manual No. 199291GS Revision 1 (2/20/2006)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAC 3.5PWA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mac allister MAC 3.5PWA

  • Page 1 Upright Pressure Washer Operator’s Manual WARNING Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Questions? Help is just a moment away! Call your technical helpline at 0845 300 2577. Model No. 020271-0 (1800 PSI Pressure Washer) Manual No. 199291GS Revision 1 (2/20/2006)
  • Page 2: Table Of Contents

    Fluid Injection applications, its limitations and any hazards involved. Flying Objects Thank you for purchasing this Mac Allister product. We are confident that this product will meet and exceed your expectations for quality and reliability. Hot Surface Please take the time to carefully read this entire...
  • Page 3 WARNING • Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when gun kicks back. Running engine gives off carbon Petrol and its vapors are extremely monoxide, an odorless, colorless, poison flammable and explosive. gas.
  • Page 4 CAUTION The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious Excessively high or low operating speeds injury and possible amputation. increase risk of injury and damage to pressure washer. Spray gun traps high water pressure, even •...
  • Page 5: Know Your Pressure Washer

    III - KNOW YOUR PRESSURE WASHER Read this operator’s manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. A - Oil Fill/Dipstick —...
  • Page 6: Assembly

    IV - ASSEMBLY To prepare your pressure washer for operation, you will need to perform these tasks: IMPORTANT: Read entire operator’s manual before 1. Attach handle to main unit. you attempt to assemble or operate your new 2. Install wheel kit. pressure washer.
  • Page 7 1. Place bottom of pressure washer frame on a 2. Attach other end of high pressure hose to high flat, even surface. Temporarily place unit on pressure outlet on pump. Tighten by hand. blocks to ease assembly. 2. Slide axle through holes in frame, as shown in Figure 1.
  • Page 8: Operation

    Checklist Before Starting Engine Review the unit’s assembly to ensure you have performed all of the following. 1. Make sure handle is in place and secure. 2. Check that oil has been added to proper level in the engine crankcase. Typical Pressure 3.
  • Page 9 CAUTION: DO NOT run the pump without the water NOTE: Always keep the throttle lever in the “Fast” supply connected and turned on. position when operating the pressure washer. • Damage to equipment resulting from failure to WARNING: Running engines produce heat. follow this instruction will void warranty.
  • Page 10: Pressure Washer Rinsing

    Applying Detergent with 1. Slide nozzle forward when you wish to adjust spray to low pressure mode. Adjustable Nozzle IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump. CAUTION: You must attach all hoses before you start the engine.
  • Page 11: Maintenance

    VI - MAINTENANCE 2. Keep the spray gun a safe distance from the area you plan to spray. The pressure washer warranty does not cover items WARNING: High pressure spray could cause you to that have been subjected to operator abuse or fall if you are too close to the cleaning surface.
  • Page 12: Nozzle Maintenance

    WARNING: The high pressure stream of water that 4. Place o-ring into threaded end of nozzle this equipment produces can pierce skin and its extension. Push o-ring snugly against in-line underlying tissues, leading to serious injury and filter screen. possible amputation. 5.
  • Page 13: Storage

    VII - STORAGE O–Ring Maintenance Through the normal operation of your pressure washer, o–rings are used to keep the connections of Preparing Unit for Storage the hoses and spray gun tight and leak–free. These Water should not remain in the unit for long periods o-rings may become worn or damaged.
  • Page 14: Troubleshooting

    Engine speed is too slow. Move throttle control to FAST Engine runs good at no-load but position. If engine still "bogs "bogs" when load is added. down", contact Mac Allister service facility. Pressure washer stops during Out of petrol. Fill petrol tank.
  • Page 15: Ce Declaration And Warranty

    (c) repairs attempted by anyone other than our authorized repair center (call 0845 300 2577); (d) damage caused by foreign objects, substances or accident. 4. In the unlikely event that this product does develop a fault, please call the Mac Allister helpline at 0845 300 2577.
  • Page 16 MacAllister Power Tools 1 Hampshire Corporate Park Chandlers Ford, Eastleigh Hants SO53 3YZ, UK 0845 300 2577...

This manual is also suitable for:

020271-0

Table of Contents

Save PDF