Samsung SHS-2320 User Manual page 30

Intruder Detection Function
It is a function that rings the alarm for a forced entry from both inside and outside of the
room. (With default functions, it cannot be turned on or off separately).
How to Turn off Emergency Alarm
Open the battery cover and take out
batteries or press [Register] button.
Built-in Fire Detection Feature
In case of a fire, this function allows a prompt exit by sounding an alarm.
(Built-in fire detection has been set as default, and user cannot turn it off.)
If a fire occurs, the temperature sensor will detect it and the alarm will sound with the blink of
LED light on the infrared ray sensor on the inner body. After the warning alarm stops, the door
will open automatically.
(When room temperature drops below the designated level, the doorlock will function normally)
- The built-in fire detection feature operates at around 65℃, although there may be some
differences depending on the environment.
28
[Inside]
Or
Peep~ Peep~ Peep~
(for 5 minutes)
If the door is opened with force while closed, the
open-door sensor will detect it and trigger the
alarm.
[Outside]
After placing a registered card or key tag or
entering password, press [ ] button.
Or
Peep~ Peep~
Peep~
(for 15 seconds)