Table of Contents
Advertisement
2
Contents
2
Safety
3
Application example
3
Characteristics
4
Installation
Getting started
Installing DTV management program
Preparing the HDMI sources
Preparing the MD3004
5
Launching the management program
Launching the Management Program DTV
Main buttons
Establish USB Communication with DTV program
8
DVB-T or DVB-C configuration
HDMI parameter setting
Modulator parameter setting DVB-T (or DVB-C)
Adding HDMI programs to the Modulator channels
Disconnecting an HDMI source
12
Switching DVB-T / DVB-C
13
Appendix 1: Original Network ID per country (Europe)
14
Appendix 2: European Channel numbering
15
Appendix 3: Constellation versus Maximum Bitrate (DVB-T)
•
All the safety and operating instructions should be read before the product is operated.
•
Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked or covered.
•
This product should be operated only from the type of power source delivered with the product.
•
If an outside antenna or cable system Is connected to the product, make sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static charges.
•
For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line surges.
•
Do not attempt to service this product yourself. Opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Contents
Safety
www.abitana.com 2
Advertisement
Table of Contents
