1. Manuals
  2. Brands
  3. Polivac Manuals
  4. Scrubber
  5. MM1700E
  6. Operations manual & trouble shooting manual

Polivac MM1700E Operations Manual & Trouble Shooting Manual

Auto scrubber
Hide thumbs Also See for MM1700E:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

POLIVAC MM1700E AUTO SCRUBBER
Operations Manual & Trouble Shooting Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM1700E and is the answer not in the manual?

Questions and answers

Corrie van Rooyen
February 27, 2025

The brush is stuck to the machine

0
1 comments:
Mr. Anderson
February 27, 2025

To fix a stuck brush on a Polivac MM1700E Auto Scrubber, follow these steps:

1. Turn off the machine – Ensure the power is off and unplugged for safety.
2. Remove the brush – Use the quick-release system to detach the brush or pad.
3. Clean the brush area – Check for dirt, debris, or obstructions under the machine and clean with a strong stream of fresh water.
4. Inspect for damage – Look for any signs of wear or damage on the brush or attachment mechanism.
5. Reattach the brush – Once cleaned and dried, securely reattach the brush or pad.
6. Test the machine – Plug it back in and turn it on to check if the brush moves properly.

If the brush remains stuck, further inspection of the motor or gear system may be needed.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for Polivac MM1700E

Summary of Contents for Polivac MM1700E

  • Page 1 POLIVAC MM1700E AUTO SCRUBBER Operations Manual & Trouble Shooting Guide...
  • Page 2 Auto Scrubber Product Summary The 1700E auto Scrubber from Polivac International automatically lays a solution on the floor, scrubs, then collects the dirty solution in one pass, via the vacuum squeegee at the rear of the machine. The solution holding component, which is located in the front half of the large polypropylene tank holds 20 litres of fluid.
  • Page 3 1700E AUTO SCRUBBER GENERAL INSTRUCTIONS DO’S  Clear the floor of sharp objects to protect the squeegee.  Always work away from the cord.  Turn the T bar at the rear of the machine to the right if you want less sideways movement to the right.
  • Page 4 1700E Autoscrubber 1700E Autoscrubber PARTS LIST 141 142 143 144 I N T E R N A T I O N A L P T Y L T D Page1...
  • Page 5 1700E Autoscrubber 1700E Autoscrubber PARTS LIST 115a 119a 105b 105c 103a 105d 103a 105a Page 2 I N T E R N A T I O N A L P T Y L T D...
  • Page 6 1700E Autoscrubber 1700E Autoscrubber PARTS LIST 20mm PVC Pipe PVT014 PVT042 32mm Elbow 45DG PVS004 32mm PVC Pipe PVT004 Inlet Elbow 15DG RT013 White Socket PVT012 Black Adaptor I N T E R N A T I O N A L P T Y L T D Page 3...
  • Page 7 1700E Autoscrubber 1700E Autoscrubber PARTS LIST 382350 Squeege Assy. I N T E R N A T I O N A L P T Y L T D Page 4...
  • Page 8 1700E Autoscrubber 1700E Autoscrubber PARTS LIST PARTS LIST PVT005 Lid (Solution Tank) VPV087 Buffer PVT001 Solution Tank VPA328CMG Drive Motor PVT001A Recovery Tank SK006 Screw 5/16 PVT035 Elbow Fitting VPV542 Nut 5/16 PVS060 Hose Quick Clamp AAD041 Screw PVS067 Solution Hose VPA836 Rubber Grommet PVS013...
  • Page 9 1700E/A23 1700E/A23 1700E/A23 1700E/A23 VPA328CMG VPA328CMG VPA328CMG VPA328CMG VPV818CMG Capacitor Box Cover VPV804CMG Start Capacitor VPV798CMG Run Capacitor VPV817CMG Capacitor Box Base VPV807CMG Manual Reset VPV813CMG Cowl VPV812CMG Cooling Fan VPV819CMG Clip on cooling fan VPV811CMG Non Drive Endshield VPV826CMG Switch Plate VPV806CMG Centrifugal Switch...

Table of Contents