1. Manuals
  2. Brands
  3. PEP Modular Computers Manuals
  4. Computer Hardware
  5. CP302
  6. Manual

PEP Modular Computers CP302 Manual

3u compactpci pentium iii-based cpu board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PEP Modular Computers CP302 Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CP302 and is the answer not in the manual?

Questions and answers

Related Manuals for PEP Modular Computers CP302

Summary of Contents for PEP Modular Computers CP302

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
  • Page 2 CP302 3U CompactPCI Pentium III-based CPU Board Manual ID 21112, Rev. Index 05 Feb 01 The product described in this manual is in compliance with all applied CE stan- dards. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 4: Table Of Contents

    Introduction 1.1 Introduction to CompactPCI ................1 - 3 1.2 PEP Single-height CPU Boards ..............1 - 4 1.3 CP302 Product Overview ................1 - 4 1.4 CP302 Board Introduction ................1 - 5 1.5 CP302 Main Specifications ................1 - 6 1.6 Power Consumption and Temperature Range ..........1 - 8 1.6.1 Temperature Range ................1 - 10...
  • Page 5 2.6.7 EIDE Interfaces ..................2 - 18 2.6.7.1 EIDE Connector CON7 Pinout ............2 - 19 Page 0 - 4 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 6 2.9.10 Memory Management of Flash Socket ..........2 - 41 2.9.11 Flash Socket Page ................2 - 41 2.10 Video Resolutions..................2 - 42 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 0 - 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 7 CP302 Chapter Installation 3.1 Board Installation ..................3 - 3 3.1.1 Placement of the CP302 ................ 3 - 4 3.1.2 EIDE Interfaces..................3 - 4 3.1.3 Keyboard/Mouse Connector ..............3 - 5 3.2 Software Installation ..................3 - 5...
  • Page 8 B.4.2.1 PMC Interface Jn1 (CON4) Pinout........... B - 7 B.4.2.2 PMC Interface Jn2 (CON5) Pinout........... B - 8 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 0 - 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 9 C.5 Jumper Description ..................C - 14 C.5.1 Serial Port Setting .................C - 14 Page 0 - 8 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 10 D.5.1.2 COM2 Configuration ..............D - 14 D.5.2 Shorting Chassis GND (Shield) to Logic GND........D - 15 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 0 - 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 11 2-1 CP302 Functional Block Diagram ..............2 - 4 2-2 CP302 Front Panels ..................2 - 5 2-3 CP302 Board Layout (Front Side) ..............2 - 6 2-4 CP302 Board Layout (Reverse Side) ............2 - 7 2-5 Keyboard/Mouse Connector ............... 2 - 14 2-6 USB Connector ...................
  • Page 12 1-2 Power Consumption Table with DOS Running ..........1 - 8 1-3 Power Consumption Table with Windows NT 4.0 Running ......1 - 9 1-4 Power Consumption Table for CP302 Accessories ........1 - 9 1-5 Typical Temperature Range and Required Air Flow ........1 - 10 2-1 Memory Options Utilizing SODIMM Sockets ..........2 - 8...
  • Page 13 4-11 Normal POST Codes after System BIOS is Shadowed ......4 - 37 A-1 Technical Specifications ................A - 3 Page 0 - 12 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 14 A-8 Jumper Setting to Configure COM1 ............A - 14 A-9 Jumper Setting to Configure COM2 ............A - 14 B-1 CP302 PMC Module Specifications............... B - 3 B-2 Jn1, 32-bit PCI Connector Pinout ..............B - 7 B-3 Jn2, 32-bit PCI Connector Pinout ..............B - 8 B-4 CompactPCI Bus Connector J1 (CON1) Pinout ..........

  • Page 15: Revision History

    This document contains information proprietary to PEP Modular Computers. It may not be copied or transmitted by any means, disclosed to others or stored in any retrieval system or media, without the prior written consent of PEP Modular Computers GmbH or one of its autho- rized agents.

  • Page 16: Explanation Of Symbols

    PEP product and/or procedure. Troubleshooting This symbol and title accompany information about trouble- shooting and problem solving. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 0 - 15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 17: For Your Safety

    They can cause short circuits and damage the batter- ies or tracks on the board. Page 0 - 16 ® PEP Modular Computers GmbH ID 16566, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 18: General Instructions On Usage

    In order to maintain PEP’s product warranty, this product must not be altered or modi- fied in any way. Changes or modifications to the device, which are not explicitly approved by PEP Modular Computers and described in this manual or received from PEP Technical Support as a special handling instruction, will void your warranty.

  • Page 19: Two Year Warranty

    “Repair Report” issued by PEP with the repaired or replaced item. PEP Modular Computers will not accept liability for any further claims resulting directly or indi- rectly from any warranty claim, other than the above specified repair, replacement or refund.
  • Page 20 Introduction 1.1 Introduction to CompactPCI ................1 - 3 1.2 PEP Single-height CPU Boards ..............1 - 4 1.3 CP302 Product Overview ................1 - 4 1.4 CP302 Board Introduction ................1 - 5 1.5 CP302 Main Specifications ................1 - 6 1.6 Power Consumption and Temperature Range ..........1 - 8 1.6.1 Temperature Range ................1 - 10...
  • Page 21 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 22: Introduction

    • Information on the distinctive features of PEP Modular Computers CompactPCI boards, such as functionality, hotswap capability. In addition, an overview is given for all existing PEP Modular Computers CompactPCI boards with links to the relating datasheets. • Generic information on the PEP Modular Computers CompactPCI backplanes,...

  • Page 23: Pep Single-Height Cpu Boards

    IIl controlled board supporting a clock speed of 700 MHz and higher when available. The CP302 is equipped with a 69030 VGA chip with 4 MB SDRAM memory. Speed of operation is assured by means of the onboard 66 MHz AGP interface. High resolution is provided with the video controller supporting pixel resolutions of up to 1600 x 1200 or up to 16.7 M colors.

  • Page 24: Cp302 Board Introduction

    • one Fast Ethernet device: 10BaseT & 100BaseTX • integrated Hardware monitor • optional Rear I/O The CP302 includes the following commonly used peripheral devices: • floppy disk interface • keyboard/USB controller • two serial ports(ESD protected and EMI compliant) •...

  • Page 25: Cp302 Main Specifications

    Cabling: Category 5 two-pair cabling Award BIOS with Preboot Agent contained within 256 kB of Flash Software memory. The BIOS parameters are saved in the EEPROM. Support The CP302 is able to operate without disks, keyboard and video operating systems: ® ® ®...
  • Page 26 Monitoring Temperature monitor: MAX 1617 monitoring the CPU on-die and board temperature The CP302 supports the addition or removal of other boards whilst in Hotswap- a powered-up state. Individual clocks for each slot and Enum signal Compatible handling are in compliance with the PCIMG 2.1 Hotswap Specification.

  • Page 27: Power Consumption And Temperature Range

    The power consumption table lists the voltage and current specifications for the CP302 board and the CP302 accessories. The values are measured with a 8 slot passive CompactPCI backplane and two power supplies, one for the CPU and the other one for the harddisk.
  • Page 28 2.0 W 5.8 W 7.8 W without VGA The 400 MHz version without VGA is not a standard version. For more information please contact PEP. Table 1-4: Power Consumption Table for CP302 Accessories Module Power 5V Power 3.3V Keyboard 100 mW...

  • Page 29: Temperature Range

    1.6.1 Temperature Range The CP302 family are the first CompactPCI boards capable of operating over the extended temperature range from -40°C up to + 85°C. All onboard components are specially selected for the higher temperature range. For the higher temperatures the desktop processors are not suitable, because the power consumption is higher and the ®...

  • Page 30: Software Support

    Linux , MS-DOS , Windows 9X , Windows 2000 , Windows NT 4.0 (Embedded). ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 1 - 11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 31: Applied Standards

    CP302 Introduction 1.8 Applied Standards 1.8.1 CE Compliance The PEP Modular Computers’ CompactPCI systems comply with the requirements of the following CE-relevant standards: • Emission EN50081-1 • Immission EN50082-2 • Electrical Safety EN60950 1.8.2 Mechanical Compliance • Mechanical Dimensions IEEE 1101.10 1.8.3...
  • Page 32 2.6.3 VGA Interface ..................2 - 16 2.6.3.1 VGA connector CON8 Pinout ............2 - 16 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 33 2.7.5 PCI VI/O setting ................... 2 - 31 2.7.6 Shorting Chassis GND (Shield) to Logic GND ........2 - 31 Page 2 - 2 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 34 2.9.10 Memory Management of Flash Socket ..........2 - 41 2.9.11 Flash Socket Page ................2 - 41 2.10 Video Resolutions..................2 - 42 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 35: Functional Description And Configuration

    CP302 Functional Description and Configuration 2. Functional Description and Configuration 2.1 Functional Block Diagram Figure 2-1: CP302 Functional Block Diagram SDRAM AGP VGA 256MB SVGA 69030 uBGA Ethernet Reset 100BaseT Clock Chipset Chipset Mobile monitor Rear I/O Southbridge Pentium III...

  • Page 36: Front Panels

    ACT (green) = if ON link is active and transmission is in progress via the Ethernet link. • SPEED (green) = if ON transmission speed is 100 MBit/s. Figure 2-2: CP302 Front Panels 4 HP 8 HP 8 HP 12 HP...

  • Page 37: Board Layouts

    CP302 Functional Description and Configuration 2.3 Board Layouts Figure 2-3: CP302 Board Layout (Front Side) MAGNIFIED SECTION SHOWING RESISTORS FOR SETTING VGA 2 LED’s LED and (Green) Reset S1 CON10 CON8 CON5 CON4 Ethernet Kbd + Mse FLASH CON13 Floppy...

  • Page 38: Cp302 Board Layout (Reverse Side)

    CP302 Functional Description and Configuration Figure 2-4: CP302 Board Layout (Reverse Side) Note that this diagram is not to scale with the Front Side Board Diagram R314 LOGIC R291 R298 R286 R302 NW15 NW20 R285 R293 R296 R303 MAGNIFIED SECTION...

  • Page 39: Main Features

    2.4.2 Memory The CP302 has two locations for installing memory; up to 128 MB may be soldered with ECC and a further 128 MB may be added by means of the onboard SODIMM socket. The board supports a maximum of 256 MB. All installed memory will be automatically detected, so there is no need to set any jumpers.

  • Page 40: Peripherals

    125 msec up to 256 seconds. If the watchdog timer is enabled, it cannot be stopped. 2.5.2 Battery The CP302 is provided with a 3.0V “coin cell” lithium battery for the RTC. To replace the battery please proceed as follows: • Turn off power •...

  • Page 41: Reset

    2.5.3 Reset The CP302 is automatically reset by a precision voltage monitoring circuit that detects a drop in voltage below the acceptable operating limit of 4.725 V for the 5V line and below 3.0V for the 3.3V line, or in the event of a power failure of the DC/DC converter. Other reset sources include the watchdog timer and local push-button switch.

  • Page 42: Smbus Devices

    2.5.4 SMBus Devices The CP302 provides a System Management Bus (SMBus) for access to several system monitoring and configuration functions. The SMBus consists of a two-wire I2C bus interface. The following table describes the function and address of every onboard SMBus device.

  • Page 43: Serial Eeprom

    CMOS backup (24LC08) It is strongly recommended that users access only the two free EEPROM banks Page 2 - 12 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 44: Flash Memory

    32-pin socket for a flexible Flash configuration. BIOS Flash The CP302 uses a 256 kB flash memory to store BIOS firmware. It can be updated as new versions of the BIOS become available. You may easily upgrade your BIOS using the AWARD awdflash utility .

  • Page 45: Board Interfaces

    PS/2 connector ia available from PEP 2.6.1.1 Keyboard Connector CON4 Pinout The CP302 has the AT keyboard connector implemented on a 6-pin Mini-Din connector. A special adapter to connect a mouse device and/or keyboard to the PS/2 connector is available from PEP.

  • Page 46: Usb Connector Con5 Pinout

    USB power supply feeding this connector is protected by a 1.5A fuse. All signal lines are EMI-filtered. 2.6.2.1 USB Connector CON5 Pinout The CP302 has one USB interface implemented on a 4-pin connector. Table 2-5: USB Connector CON5 Pinout Name Function...

  • Page 47: Vga Interface

    15-pin female D-sub connector, with a maximum vertical retrace non-interlaced frequency of 85 Hz. 2.6.3.1 VGA Connector CON8 Pinout The 15-pin female connector CON8 is used to connect a VGA monitor to the CP302 board. Table 2-6: VGA Connector CON8 Pinout D-sub 15...

  • Page 48: Fast Ethernet

    CP302 Functional Description and Configuration 2.6.4 Fast Ethernet The CP302 board includes a 10BASE-T/100BASE-TX network solution based on the ® Intel 82559 Fast Ethernet PCI Bus Controller. The controller contains two receive and transmit FIFO buffers that prevent data overruns or underruns while waiting for access to the PCI bus.

  • Page 49: Fan Power Supply

    HardDisk manufacturer’s documentation. EIDE connector pinout appears on the following page Page 2 - 18 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 50: Eide Connector Con7 Pinout

    DMA request Ground signal I/O write Ground signal I/O read Table continued on following page ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 19 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 51 Address 2 HCS0 HD select 0 HCS1 HD select 1 LED driving Ground signal Page 2 - 20 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 52: Floppy Drive Interface

    ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 21 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 53: Pci Extension Connector Con6

    J2 has optional Rear I/O interface functionality. The board is capable of driving up to seven CompactPCI slots, with individual arbitration and clock signals. In addition to standard CompactPCI system functionality, the CP302 also supports Hotswap capability which means that hotswappable boards can be removed from or installed in the system whilst it is running.

  • Page 54: Compactpci Connectors Con1 And Con2 Pinouts

    Functional Description and Configuration 2.6.9.1 CompactPCI Connectors CON1 and CON2 Pinouts The CP302 is provided with two 2 mm x 2 mm pitch female CompactPCI bus connectors, J1 and J2. Table 2-11: CompactPCI Bus Connector J1 (CON1) Pinout Row A...

  • Page 55: Bit Compactpci Bus Connector J2 (Con2) Pinout

    BE[6]#] CLK4 GNT3# REQ4# GNT4# CLK2 CLK3 SYSEN# GNT2# REQ3# CLK1 REQ1# GNT1# REQ2# Page 2 - 24 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 56: Rear I/O Interface

    Rear I/O functionality and one with 32-bit/33 MHz and some Rear I/O peripherals. For the system Rear I/O feature a special backplane is necessary. The CP302 with Rear I/O is compatible with all standard CompactPCI passive backplanes with Rear I/O support on the system slot.

  • Page 57: Rear I/O Configuration Illustration

    CP302 Functional Description and Configuration 2.6.10.1 Rear I/O Configuration Illustration Figure 2-9: CP302 Rear I/O Configuration Page 2 - 26 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 58: Rear I/O Compactpci Bus Connector J2 (Con2) Pinout

    Functional Description and Configuration 2.6.10.2 Optional Rear I/O interface on Compact PCI Connector CON2 The CP302 conducts a wide range of I/O signals through the Rear I/O connector J2. Note: If the Rear I/O feature is selected the PCI interface is only 32-bit.

  • Page 59: Rear I/O Jumper Setting

    J2 connector. Note: The combination of both front and Rear I/O is not supported. Page 2 - 28 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 60 Serial Interface COM1 and COM2 Only one interface may be used (Rear I/O or front I/O). If the Rear I/O interface is enabled the drivers for the COM1 and COM2 port on the CP302 IDE2 module must be disabled. Keyboard/Mouse Interface All PS2 connectors are electrically identical.

  • Page 61: Jumper Description

    Table 2-16: Flash Type Selection Function Comment Closed 4 Mbit flash type Open 2 Mbit flash type Default Page 2 - 30 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 62: Fan Power Supply Selection

    2.7.5 PCI VI/O setting The CP302 provides for either a 5V or 3.3V PCI signaling environment. The BVI/O power jumpers on the board are used to power the buffers on the peripheral boards and the PMC interface. The BVI/O does not provide power to the CompactPCI interface.

  • Page 63: Jumper Setting For Rear I/O

    Open Closed Note: The combination of both front and Rear I/O is not supported. Page 2 - 32 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 64: Reserved Jumpers

    The VGA signals are available on J2 when the board is ordered for Rear I/O configura- tion. In this configuration both interfaces are active. The 75 ohm termination resistor for the red, green and blue video signals are equipped on the CP302. Table 2-21: VGA Interface Configuration...

  • Page 65: I/O Address Map

    Serial port COM3 3F0,3F7 Floppy Disk + Super-I/O #1 Com. 3F8,3FF Serial port COM1 Page 2 - 34 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 66: Special Registers Description

    Functional Description and Configuration 2.9 Special Registers Description The following registers are special registers for the CP302 to watch the onboard hardware special features and the CompactPCI control signals. Normally, only the system BIOS uses these registers, but they are documented here for application use as required.

  • Page 67: Watchdog Timer

    CP302 Functional Description and Configuration 2.9.1.2 Watchdog Timer The CP302 has one watchdog timer with a programmable timeout ranging from 125 msec. to 256 sec. The I/O location for the watchdog configuration is 0x282. Table 2-24: Watchdog Configuration Bits Type...

  • Page 68: Interrupt Configuration Register

    0 = disable IRQ5 Watchdog SMI routing 1 = enable SMI 0 = disable SMI ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 37 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 69: I/O Status

    0x31 = CP302PM The content of this register is unique for each PEP CompactPCI board. Page 2 - 38 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 70: Hardware Index

    1 = no Rear I/O module plugged in 0 = Rear I/O module plugged in Reserved Reserved ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 39 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 71: Logic Version

    Table 2-32: PCI Interrupt Routing Bits Type Default Function Reserved P1 INTD P1 INTC P1 INTB P1 INTA Page 2 - 40 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 72: Memory Management Of Flash Socket

    0 = 8kB 0xDE000 - DFFFF Note: The default value for DiskOnChip is 8 kB. ™ ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 2 - 41 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 73: Video Resolutions

    CP302 Functional Description and Configuration 2.10 Video Resolutions The CP302 supports different video resolutions to produce different display parameters. A complete list of possible video resolutions and the relating display parameters is shown in the following table: Table 2-35: Video Resolutions and Display Parameters...
  • Page 74 CP302 Installation Chapter Installation 3.1 Board Installation ...................3 - 3 3.1.1 Placement of the CP302 ...............3 - 4 3.1.2 EIDE Interfaces..................3 - 4 3.1.3 Keyboard/Mouse Connector ..............3 - 5 3.2 Software Installation ..................3 - 5 ID 21112, Rev. 05 ®...
  • Page 75 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 76: Installation

    One or more of the above mentioned mass storage and I/O devices may be connected to your CP302 controller board. How- ever, none of these devices have to be installed for the CP302 to function, as it is designed to be bootstrapped solely from the FLASH device.

  • Page 77: Placement Of The Cp302

    3.1.2 EIDE Interfaces. The CP302 board is provided with two EIDE interfaces, a primary onboard and a secondary on the Rear I/O. The EIDE interfaces each allow installation of up to two devices (one master-slave pair).

  • Page 78: Keyboard/Mouse Connector

    CP302 Installation 3.1.3 Keyboard/Mouse Connector The CP302 uses a PC/AT standard keyboard/mouse connection realized as a 6-pin shielded mini-DIN connector. To connect both a mouse and keyboard to your mini-DIN connector, a suitable keyboard/mouse Y-adapter may be used Attention When plugging in your keyboard and mouse, or when plugging anything into a Serial or Com port, make sure that the power is off.
  • Page 79 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 80: Id 21112, Rev. 05 ® Pep Modular Computers Gmbh Page

    4.12 Password Setting ..................4 - 30 4.13 POST Messages ..................4 - 31 4.14 POST Codes ....................4 - 35 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 81 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 82: Cmos Setup

    The rest of this manual is intended to guide you through the process of configuring your system using Setup. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 83 Press F1 to continue, DEL to enter SETUP Page 4 - 4 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 84: Keyboard Commands

    F9 Key Reserved F10 Key Save all the CMOS changes, only for Main Menu ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 85 Chipset screen without good reason. The Chipset defaults have been carefully chosen by PEP Modular Computers for optimum performance and reliability. Even a seemingly small change to the Chipset setup may result in the system becoming unstable.

  • Page 86: Main Setup Menu

    Advanced Power Management (APM) options. PNP/PCI Configuration PlugandPlay standard and PCI Local Bus configuration options. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 87 Save settings in non-volatile CMOS RAM and exit Setup. Exit Without Save Abandon all changes and exit Setup. Page 4 - 8 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 88: Standard Cmos Setup

    AUTO Figure 4-2: Standard CMOS Setup Menu — Screen Display ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 89: Description Of Drive Specifications

    For drives with greater than 1024 cylinders. Page 4 - 10 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 90: Diskette Drives

    Color Graphics Adapter, power-up in 80 column mode CGA 80 Monochrome adapter, includes high resolution monochrome adapters MONO ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 91: Post Specific Commands

    Lines in your file that start CONFIG with load programs into high memory. LOADHIGH Page 4 - 12 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 92: Bios Features Setup

    POST. Better to find a problem during POST than lose data during your work. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 93 Keystrokes repeat at a rate determined by the keyboard controller in your system. When Enabled, you can select a typematic rate and typematic delay. Page 4 - 14 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 94 ROM occupies to shadow it into the correct area of RAM. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 95: Setting Flash Page Size

    CMOS Setup Socket Window Page The CP302 is equipped with a 32-pin socket to take additional Flash-ROM. This Flash- ROM may be addressed by a paging mechanism. The size of one Flash page can be set at this point as follows:...

  • Page 96: Null-Modem Cable Connection

    For further information please refer to the manual for the Award Preboot Agent™ 2.0 which accompanies the manual for the Award Preboot Manager™ 2.0. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 17 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 97: Chipset Features Setup

    Select the RAS to CAS delay time. See Refresh Cycle Time for information about the Auto Configuration of this value. Page 4 - 18 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 98 The user information for peripherals that need to use this area of system memory usually discusses their memory requirements. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 19 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 99 SDRAM CAS latency Time: 2 If additional RAM is installed in the SODIMM socket, automatic SDRAM Control is recommended. Field Shutdown Temperature: this does not exist for the CP302 Page 4 - 20 ® PEP Modular Computers GmbH ID 21112, Rev. 05...

  • Page 100: Power Management

    Configuration and Power Interface (ACPI) specification. Currently, Windows 98 ® ® Windows 2000 and Windows NT support ACPI. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 21 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 101 Name the interrupt request (IRQ) line assigned to the modem (if any) on your system. Activity by the selected IRQ always awakens the system. Page 4 - 22 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 102: Pm Timers

    Time (hh:mm:ss) Alarm Set the time at which you want the alarm to go off. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 23 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 103: Pnp/Pci Configuration

    Figure 4-7: PNP/PCI Configuration — Screen Display Page 4 - 24 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 104 PCI EIDE channels, with the primary PCI EIDE channel having a lower interrupt than the secondary. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 25 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 105: Integrated Peripherals

    EIDE HDD Block Mode Select Enabled only if your hard drives support block mode. Page 4 - 26 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 106 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 27 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 107 Select the time after which the action selected occurs, if the watchdog timer is not retriggered. Page 4 - 28 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 108: Special Setup Features

    When the Board Index is 00 this item is not displayed. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 29 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 109: Password Setting

    To clear the password, simply press “↵” when asked to enter a password. Then the password function is disabled. Page 4 - 30 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 110: Post Messages

    Ensure also that the card is installed firmly in the slot. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 31 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 111 Page 4 - 32 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 112 When this error appears, the system boots in ISA mode so that you can run the EISA configuration utility. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 33 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 113 When this error appears, the system boots in ISA mode so that you can run the EISA configuration utility. Page 4 - 34 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 114: Post Codes

    Copies CMOS to stack If supported: Checks for dual processor Table continued on following page ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 35 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 115 If not warm boot: tests SlavePIC mask register bits Tests PIC’s by use of timer. Restores timer Table continued on following page Page 4 - 36 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 116: Normal Post Codes After System Bios Is Shadowed

    Installs EIDE HardDisk and ATAPI drives Checks and initializes COM/LPT ports Table continued on following page ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 37 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 117 Disables unused shadow areas Releases lower 32KB of E000 Segment Table continued on following page Page 4 - 38 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 118 Releases upper 32KB of E000 Segment if Award Preboot Agent not present and active 0FFh Boot ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page 4 - 39 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 119 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 120: Appendix

    Speaker Connector J2 ................A - 14 Jumper Description .................. A - 14 A.5.1 Serial Port Setting ................A - 14 ID 21112, Rev. 05 © PEP Modular Computers GmbH Page A - 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 121 This page was intentionally left blank. Page A - 2 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 122: Overview

    A. I/O Module A.1 Overview The PEP CP302 I/O module has been designed to provide the CP302 user with an effective gateway to the world of additional standard PC interfaces, including two COM ports, a parallel port and floppy and HardDisk interfaces. This additional capability opens up the broadest range of expansion possibilities.

  • Page 123: Module Layouts

    Serial Port COM2 (CON6) Figure A-2: I/O Module Layout, Standard Version (Reverse Side) CON8 CON10 Page A - 4 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 124: Harddisk I/O Module Layout

    The reverse side of the HardDisk version is identical to the reverse side of the standard version illustrated above. ID 21112, Rev. 05 © PEP Modular Computers GmbH Page A - 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 125: Module Interfaces (Front Panel And Onboard)

    I/O Module A.4 Module Interfaces (Front Panel and On-board) The front panel of the I/O module is integral with the CP302 baseboard front panel - please see Figure 2-2 in Chapter 2. The I/O module includes additional standard PC interfaces, two configurable COM ports, one ECP/EPP compatible Parallel Port I/O Module Connection Interface and an onboard HardDisk and floppy interface.

  • Page 126: Parallel Port Interface

    Free A.4.2 Parallel Port Interface Figure A-5: PC-compatible Parallel Interface The CP302 IO module is provided with an IEEE1284, ECP/EPP- compatible parallel port/printer interface. The parallel port is a 26-pin MDR (miniature delta ribbon) connector mounted on the front panel. To use a standard parallel port device a special adapter is necessary.

  • Page 127: Parallel Port Connector Con4 Pinout

    CP302 I/O Module A.4.2.1 Parallel Port Connector CON4 Pinout The CP302 I/O transition module is provided with a PC-compatible 26-pin MDR connector CON4. Table A-4: 26-Pin MDR Connector CON4 Pinout -AFD Auto feed -STB Strobe data LSB of printer -ERR...

  • Page 128: Onboard Eide Connector Con5 Pinout

    CP302 I/O Module A.4.3 Onboard EIDE Connector CON5 Pinout A 2.5” HardDisk may be connected directly to the CP302 I/O module. The HDD is connected to a 44-pin connector. Table A-5: Pinout of the AT 44-pin EIDE Connector CON5 Signal...
  • Page 129 HCS1 HD select 1 LED driving Ground signal 5V power 5V power Ground signal Page A - 10 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 130: Eide Connector Con9 Pinout

    I/O Module A.4.4 EIDE Connector CON9 Pinout The CP302 I/O board has one EIDE interface on a standard 40-pin 2.54mm pin row connector. By means of this EIDE interface up to two HardDisk drives (one master/slave pair) may be attatched to the I/O board. The following table describes the pinout of connector CON9, with the corresponding signal names.
  • Page 131 Address 2 HCS0 HD select 0 HCS1 HD select 1 LED driving Ground signal Page A - 12 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 132: Floppy Drive Interface

    CP302 I/O Module A.4.5 Floppy Drive Interface The floppy drive interface of the CP302 I/O module is realized as a 34-pin, 2.54-mm pitch pin row connector. Important! If the floppy drive connection cable is inverted (pin “1” in place of pin “34”) at “power on”, the floppy drive will work uninterruptedly,...

  • Page 133: I/O Interface Connectors (Con8 And Con10)

    I/O Module A.4.6 I/O Interface Connectors (CON8 and CON10) The I/O interface connectors (CON8 and CON10) provide all the necessary signals for the CP302 I/O module. A.4.7 Speaker Connector J2 This 2-pin connector enables connection to an external speaker. A.5 Jumper Description A.5.1 Serial Port Setting...

  • Page 134: Appendix

    CompactPCI Bus Connectors CON1 and CON2 Pinouts .... B - 9 Board Installation ..................B - 11 ID 21112, Rev. 05 © PEP Modular Computers GmbH Page B - 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 135 This page was intentionally left blank. Page B - 2 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 136: Overview

    B. PMC and CompactPCI Expansion Module B.1 Overview The PEP CP302 PMC module has been designed to provide the CP302 user with an effective gateway to the world of PMC modules and to the expanded capability made possible by the additional CompactPCI interface.

  • Page 137: Module Layout

    Figure B-2: PMC Module Layout, Version without CPCI Connectors (Rear View) CON7 CON8: PCI Expansion Connector CON9 Page B - 4 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 138: B-3 Pmc Module Layout, Version With Cpci Connectors (Front View)

    Figure B-4: PMC Module Layout, Version with CPCI Connectors (Rear View) CON7 CON2 CON8: PCI Expansion Connector CON1 CON9 ID 21112, Rev. 05 © PEP Modular Computers GmbH Page B - 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 139: Module Interfaces

    PCI Specification Rev. 2.1. B.4.2 PMC Interface The PMC interface provides an easy way to extend the CP302 via the wide array of interfaces and functions which are available on PMC modules produced by the entire range of PMC vendors. PMC connectors provide a 32-bit wide PCI data path with a speed of up to 33 MHz which is routed to the onboard connectors Jn1 and Jn2.

  • Page 140: Pmc Interface Jn1 (Con4) Pinout

    AD[09] Ground C/BE[0]# AD[06] AD[05] AD[04] Ground V(I/O) AD[03] AD[02] AD[01] AD[00] Ground REQ64# ID 21112, Rev. 05 © PEP Modular Computers GmbH Page B - 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 141: Pmc Interface Jn2 (Con5) Pinout

    AD[07] PMC-RSVD +3.3V PMC-RSVD PMC-RSVD Ground PMC-RSVD PMC-RSVD Ground PMC-RSVD ACK64# +3.3V Ground PMC-RSVD Page B - 8 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 142: Compactpci Bus Interface

    B.4.3 CompactPCI Bus Interface B.4.3.1 CompactPCI Bus Connectors CON1 and CON2 Pinouts The CP302 PMC module is provided with two 2 mm x 2 mm pitch female CompactPCI bus connectors, J1 (CON1) and J2 (CON2). Table B-4: CompactPCI Bus Connector J1 (CON1) Pinout...

  • Page 143: B-5 Compactpci Bus Connector J2 (Con2) Pinout

    V(I/O) V(I/O) CLK4 GNT3* REQ4* GNT4* CLK2 CLK3 GNT2* REQ3* CLK1 REQ1* GNT1* REQ2* Page B - 10 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 144: Board Installation

    6 mm) to secure the module to the CP302 PMC Module Installation Place the EMC gasket on the bezel of your PMC module Push the PMC bezel into the window of the front-panel of the CP302 and plug the connectors together. ×...

  • Page 145: B-5 Installation Diagrams

    CP302 PMC and CompactPCI Expansion Module Figure B-5: Installation Diagrams PMC module CP302 PMC Front Panel CompactPCI connector 10mm stand-off PMC bezel 4 *M2.5 *6mm screws Page B - 12 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 146: Appendix

    Jumper Description ................. C - 14 C.5.1 Serial Port Setting ................C - 14 ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 147 This page was intentionally left blank. Page C - 2 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 148: Overview

    C. IDE2 Module C.1 Overview The PEP CP302/CP302-PM IDE2 module has been designed to provide the user with an effective gateway to the world of additional standard PC interfaces, including two COM ports, a parallel port and floppy and HardDisk interfaces. This additional capability opens up the broadest range of expansion possibilities.

  • Page 149: Module Layouts

    Figure C-2: IDE2 Module Layout, Standard Version (Reverse Side) CON8 I/O Interface CON10 I/O Interface Page C - 4 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 150: Harddisk Ide2 Module Layout

    Figure C-4: IDE2 Module Layout, HardDisk Version (Reverse Side) CON8 I/O Interface CON10 I/O Interface ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 151: Module Interfaces (Front Panel And On-Board)

    IDE2 Module C.4 Module Interfaces (Front Panel and On-board) The front panel of the IDE2 module is integral with the CP302/CP302-PM baseboard front panel - please see Figure 2-2 in Chapter 2. The IDE2 module includes additional standard PC interfaces, two configurable COM ports, one ECP/EPP compatible Parallel Port I/O Module Connection Interface and an onboard HardDisk and floppy interface.

  • Page 152: Serial Port Connectors Con2 And Con6 Pinouts

    Note: The RS422 connector is PEP-specific and the serial control signals are not available. ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 153: Parallel Port Interface

    Signal ground -ACK accepted Signal ground Busy Signal ground Paper end Ready to SLCT receive Page C - 8 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 154: Eide Interface

    HD data 0 In/Out HD15 HD data 15 In/Out Table continued on following page ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 155 HCS1 HD select 1 LED driving Ground signal 5V power 5V power Ground signal Page C - 10 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 156: Eide Connectors Con7 And Con9 Pinouts

    DMA request Ground signal I/O write Ground signal I/O read Table continued on following page ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 157 Address 2 HCS0 HD select 0 HCS1 HD select 1 LED driving Ground signal Page C - 12 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 158: Floppy Drive Interface

    Write protect RDDATA Read data HEADSEL Head select DSKCHG Disk change Ground signal NUMBERS. ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 159: I/O Interface Connectors (Con8 And Con10)

    Table C-9: Jumper Settings for RS422 TXD and RS485 Termination (COM1) Termination Closed Open Page C - 14 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 160: C-10 Jumper Setting To Configure Com2

    Table C-12: Jumper Settings for RS422 TXD and RS485 Termination (COM2) Termination Closed Open ID 21112, Rev. 05 © PEP Modular Computers GmbH Page C - 15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 161 This page was intentionally left blank. Page C - 16 © PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 162: Cp-Rio3-01 Rear I/O Module

    Rear I/O interface on CompactPCI Connector CON1 ......D - 13 D.4.9.1 CompactPCI Connector CON1 Pinout ........D - 13 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 163 D.5.1.2 COM2 Configuration ..............D - 14 D.5.2 Shorting Chassis GND (Shield) to Logic GND ........D - 15 Page D - 2 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 164: Overview

    D. CP-RIO3-01 Rear I/O Module D.1 Overview The CP302 family (CP302, CP302-PM and CP301) provides optional Rear I/O connectivity for peripherals, a feature which may be particularly useful in specialised CompactPCI systems. Some standard PC interfaces are implemented and assigned to the front panel and to the rear connector J2.

  • Page 165: Front Panels

    Figure D-1: CP-RIO3-01 Front Panels, 4HP and 8HP Versions 4 HP 8 HP CP RIO3-01 CP RIO3-01 SPEED Page D - 4 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 166: Module Layout: 4Hp And 8Hp Versions

    CON7 CON3 CON8 CON4 CON9 CON10 COM1 CON5 Serial RIBBON Port FLATCABLE CONNECTION CON10 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 167: Module Interfaces

    The keyboard power supply is protected with a fuse (500mA) and all the signal lines are EMI-filtered. Page D - 6 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 168: Usb Interfaces

    The USB power supply feeding the two ports is protected by a 1.5 A fuse. All signal lines are EMI-filtered. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 169: Vga Interface

    The 75 Ohm termination resistors for the three VGA signals (red, green, blue) are located on the baseboard. Page D - 8 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 170: Fast Ethernet Interface

    D.4.5 Ethernet LED Status Important note: The two green Ethernet LED’s are not active on the CP-RIO3-01. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 171: Serial Port Interfaces

    Clear to send Ring indicator Note: To ensure the proper functioning of the Rear I/O serial interfaces, the drivers for COM1 and COM2 on the CP302 I/O module must be disabled. Page D - 10 ® PEP Modular Computers GmbH ID 21112, Rev.

  • Page 172: Fan Control Interface (Optional)

    HD12 HD data 12 In/Out HD data 2 In/Out Table continued on following page ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 173 Address 2 HCS0 HD select 0 HCS1 HD select 1 LED driving Ground signal Page D - 12 ® PEP Modular Computers GmbH ID 21112, Rev. 05 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 174: Rear I/O Interface On Compactpci Connector Con1

    IDECSB1 CLK4 GNT3 REQ4 GNT4 CLK2 CLK3 SSYSEN GNT2 REQ3 CLK1 REQ1 GNT1 REQ2 ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 175: Jumper Setting

    3) VGA Signals (only 32-bit and Rear I/O) 4) EIDE Port (only 32-bit and Rear I/O) 5) Reserved 6) The battery and LED signals are active only on the CP301 and CP302-PM The greyed table cells indicate the power grouping Jumper Setting D.5.1 COM Port Configuration...

  • Page 176: Shorting Chassis Gnd (Shield) To Logic Gnd

    Connectors are connected to logic GND and chassis GND The default setting is indicated by italics. ID 21112, Rev. 05 ® PEP Modular Computers GmbH Page D - 15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 177 This page was intentionally left blank. ® PEP Modular Computers GmbH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 178 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

Table of Contents