Table of Contents
Advertisement
32-3008.fm Page 12 Thursday, April 6, 2000 4:03 PM
Note: We recommend you not adjust the
GAIN
controls after you have preset the in-
puts as some sound imbalance could occur.
Setting the Sound Balance
lets you adjust the sound balance
BALANCE
between the left and right speakers. If your
speakers are properly positioned and your
listening area is centered between the
speakers, the center setting of the control is
usually the best.
If the sound seems to be louder from one
speaker, adjust
BALANCE
seems to be coming from a point midway be-
tween the speakers.
USING A MICROPHONE
Using an XLR Microphone
To mix the microphone connected to the
XLR jack with other audio input sources, ad-
just
to increase or decrease
DJ MIC LEVEL
the microphone volume without affecting the
volume of the other inputs.
Set
to
when you are not us-
DJ MIC LEVEL
0
ing the DJ microphone. Or, if the microphone
has an ON/OFF control, set it to OFF and
leave
at its preset position.
DJ MIC LEVEL
Using an AUX Microphone
To mix a microphone connected to the
jack with other audio input sources, set
MIC
to
. Adjust
AUX MIC/LINE
MIC
increase or decrease the microphone vol-
ume without affecting the volume of the other
inputs.
When you are not using an
set
to
AUX MIC/LINE
LINE
the output from the device connected to
jacks.
LINE MONO
12
Using TALKOVER
To use the microphone and reduce other au-
dio inputs so the microphone can be heard
more clearly, set
To turn off
OFF
and
and the background music volume is not re-
duced.
Using MUTE LEVEL
To increase background music when using
until the sound
TALKOVER
To reduce background music, rotate it to-
ward
Using PAN
To play either microphone or the
output on the left or right channel, adjust the
appropriate
through the left channel, to
the right channel, or to any other position be-
tween
USING SOUND EFFECTS
There are six preprogrammed sound effects
for your mixing selection — a hi-hat close, a
rim shot, a cow bell, a cymbal, a bass drum,
and a laser drum.
To play a sound effect, repeatedly press or
AUX
hold down the desired
ton.
to
AUX LEVEL
Rotate
increase and decrease the sound effect vol-
ume.
microphone,
AUX
USING ECHO EFFECTS
. This lets you mix
AUX
The mixer plays echo effects, and lets you
adjust the echo delay, the number of echo
repeats, and the echo's volume.
Operation
TALKOVER
, set T
TALKOVER
. All the audio inputs including
play at the same output level,
AUX MIC
, rotate
MUTE LEVEL
.
MAX
control. Set it to
PAN
R
and
to play through both channels.
L
R
SOUND EFFECT
SOUND EFFECT LEVEL
to
.
ON
to
ALKOVER
DJ MIC
toward
.
MIN
AUX LINE
to play
L
to play through
but-
left or right to
Hide quick links:
Advertisement
Table of Contents
