European Visual Reporting Points - Garmin GTN 625 Flight Manual

Prior to using ASR, the pilot must complete the ASR Qualification Procedure
from the GTN Cockpit Reference Guide.
The Command History Page details the commands received by ASR for that
power cycle. A full list of commands and a tips for using ASR can be found in
the GTN 6XX/7XX Telligence Voice Command Guide, 190-01007-50.
When using ASR for "TUNE" commands, it is recommended that the pilot
enable Reverse Frequency Lookup (RFL) on the associated GTN.

7.26 European Visual Reporting Points

If the GTN is interfaced with a G500/600 PFD/MFD, and a flight plan in the
GTN contains a VRP, the G500/600 must have a database that contains the VRP
in order to appropriately display the VRP on the MFD map. If the database on
the PFD/MFD does not contain the VRP, the VRP will display on the MFD map
as an intersection.
190-01007-A2 Rev. 6 AFMS, Garmin GTN GPS/SBAS System
Page 42