Table of Contents
Advertisement
Tips for saving energy
The following information will help you to use your
appliance in an ecological way, and to save energy:
•
Use dark coloured or enamel coated cookware in
the oven since the heat transmission will be
better.
•
While cooking your dishes, perform a preheating
operation if it is advised in the user manual or
cooking instructions.
•
Do not open the door of the oven frequently
during cooking.
•
Try to cook more than one dish in the oven at the
same time whenever possible. You can cook by
placing two cooking vessels onto the wire shelf.
•
Cook more than one dish one after another. The
oven will already be hot.
•
You can save energy by switching off your oven a
few minutes before the end of the cooking time.
Do not open the oven door.
•
Defrost frozen dishes before cooking them.
1
2
3
1
2
3
4
5
6
7
8
9
p
12
ON/OFF key
Function display
11
Current time indicator field
Oven Inner Temperature symbol
Temperature indicator field
StarVstop cooking key
Temperature setting key
Booster symbol (rapid pre-heating)
Plus key
10
Minus key
11
Adjustment key
12
Return Key to function display
10
1. At the initial operation of the oven
G
symbol
lights up, touch
A
I
v
keys to set the hour.
•
Use pots/pans with cover for cooking. If there is
no cover, energy consumption may increase 4
times.
•
Select the burner which is suitable for the bottom
size of the pot to be used. Always select the
correct pot size for your dishes. Larger pots
require more energy.
•
Pay attention to use flat bottom pots when
cooking with electric hobs.
Pots with thick bottom will provide a better heat
conduction. You can obtain energy savings up to
1/3.
•
Vessels and pots must be compatible with the
cooking zones. Bottom of the vessels or pots
must not be smaller than the hotplate.
•
Keep the cooking zones and bottom of the pots
clean. Dirt will decrease the heat conduction
between the cooking zone and bottom of the pot.
Initial use
Time setting
4
9
8
7
2. Confirm the setting by touching
G
symbol and
wait for 4 seconds without touching any keys to
confirm.
If the current time is not set, time indicator will
start increasing/moving up from 12:00.
G
symbol will be activated to indicate that the
current time has not been set. It will disappear
as soon as the time is set.
17/EN
Advertisement
Table of Contents
