Internet Radio (Vtuner) Error Code - Philips BDP5110/F7 D Service Manual

INTERNET RADIO (vTuner) ERROR CODE

Error Code appears in the error screen when the unit
detects an error, as shown below. The code is used to
specifically determine the cause of error.
Network Error
Network Error
Play back Error.
Connection Error
OK OK
OK
Error message
Fig. 1: Error Code (Example)
Error Code are displayed with "NE[********]" ("*" is
error code) as shown above.
Error Code Form
In the Internet Radio(vTuner), Error Code are used as
follows.
0 0 1 X X X X X
Fig. 2
NE[00103203]
NE[00103404]
Error Code
Detailed Error Code
Summary Error Code
"Summary Error Code" are shown in the list below.
Summary
Error Code
Cannot connect to server. Please
01
check your settings.
02 Playback Error
03 Connection Error
• The Detailed Error Code shows the three-digit code
used in the HTTP Status Code or used internally in
the Application.
• The HTTP Status Codes (200 to 500 series) are
defined in the RFC2616.
• Depending on the specification of the station or the
server, error codes not listed in the table may
appear.
1-9-1
Error message
E5P50ER