Watching Tv; Connecting An Antenna; Turning The Tv On For The First Time - LG 42PA4500-TF Owner's Manual

16

WATCHING TV

WATCHING TV

Connecting an antenna

Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
y Use a signal splitter to use more than 2
y
TVs.
y If the image quality is poor, install a signal
y
amplifier properly to improve the image
quality.
y If the image quality is poor with an
y
antenna connected, aim the antenna to
the correct direction.
y An antenna cable and converter are not
y
supplied.
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press
the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
y You can also access Factory Reset by
y
accessing OPTION in the main menus.
3
4
(POWER) to turn
5
Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language Selects a language to display.

Mode Setting Selects Home Use for the
Home environment.

Country Selects a country to display.
(Except Israel)

Time Zone Selects a Time Zone to
display.(Only Australia)

Auto Tuning Scans and saves available
channels automatically.
NOTE
y DTV mode control buttons may not
y
function based on country broadcasting
circumstances. (Only DTV)
y In country that Digital broadcasting
y
regulation isn't fixed, some DTV function
may not work depending on digital
broadcasting circumstances. (Only DTV)
y To display images in the best quality for
y
your home environment, select Home
Use.
y The Store Demo is suitable for the retail
y
environment.
y If you select Store Demo, the any
y
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
When the basic settings are complete,
press OK.
NOTE
y If you do not complete the Initial setting, it
y
will appear whenever the TV turns on.
y Disconnect the power cord from the
y
power outlet when you do not use the TV
for a long period of time.
To turn the TV off, press (POWER) .