Acer H5350 Series User Manual

Acer H5350 Series User Manual

Acer projector h5350 series user's guide
Hide thumbs Also See for H5350 Series:

Advertisement

Acer Projector
H5350 Series
User's Guide

Advertisement

Table of Contents
loading

Summary of Contents for Acer H5350 Series

  • Page 1 Acer Projector H5350 Series User's Guide...
  • Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 3 Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
  • Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.
  • Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
  • Page 6 Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.
  • Page 7 Operating environment for using wireless function (Optional) Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G.
  • Page 8 viii Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems.
  • Page 9 Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://global.acer.com/about/ sustainability.htm Mercury advisory...
  • Page 10: Precautions

    First thing first Usage notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
  • Page 11: Table Of Contents

    Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Acer Empowering Technology Onscreen Display (OSD) Menus Color setting Image setting Management setting...
  • Page 12 Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices...
  • Page 13: Introduction

    • technology • Native 1280 x 720 720P resolution 4:3/16:9/L.Box aspect ratio supported • Acer ColorBoost technology delivers nature's true colors for vivid, life like images and excellent video performance • Better cross-over performance between data and video • Versatile and user-friendly display modes (Bright, Standard, Vivid Cinema,...
  • Page 14: Package Overview

    This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord VGA cable CR2025 Composite video cable Battery Security card Acer Projector Quick Start Guide User’s guide Remote control Quick start guide...
  • Page 15: Projector Overview

    Projector Overview Projector Outlook Front / upper side Description Zoom ring Focus ring Zoom lens Lens cap Rear side Description USB connector HDMI connector Analog RGB/component input connector Component video input connector S-Video input connector Description Power button and Power Indicator LED Remote control Remote control receiver Description...
  • Page 16: Remote Control And Control Panel Layout

    Remote Control and Control Panel Layout # Icon Function Infrared Sends signals to the projector. transmitter Power/Power Power button and Power Indicator LED. POWER Refer to the "Turning the Projector On/Off" section. • MENU • Four directional Use up, down, left, right buttons to select items or make select keys adjustments to your selection.
  • Page 17 Function HIDE Momentarily turns off the video. Press "HIDE" to hide the image, press again to display the image. Empowering Unique Acer functions: eView, eTimer Management. FREEZE To pause the screen image. Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector.
  • Page 18: Getting Started

    Getting Started Connecting the Projector DVD player, Set-top Box, HDTV receiver Description Power cord USB cable VGA cable Composite video cable Audio cable Jack/Jack Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.
  • Page 19: Turning The Projector On/Off

    Turning the Projector On/Off Turning on the Projector Remove the lens cap.(Illustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue.
  • Page 20: Turning Off The Projector

    Turning off the Projector To turn off the projector, press the "Power" button twice. The message below will display onscreen for 5 seconds. "Please press power button again to complete the shutdown process." Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 120 seconds.
  • Page 21: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle. Tilt adjusting wheel...
  • Page 22: How To Optimize Image Size And Distance

    How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • If the projector is 3 m from the screen, good image quality is possible for image sizes between 80"...
  • Page 23 Screen size Desired (Min zoom) Distance Diagonal W (cm) x <A> (inch) H (cm) <B> 88 x 50 118 x 66 147 x 83 176 x 99 206 x 116 235 x 132 265 x 149 294 x 165 353 x 199 412 x 232 471 x 265 529 x 298...
  • Page 24: How To Get A Preferred Image Size By Adjusting Distance And Zoom

    How to get a preferred image size by adjusting distance and zoom 1.9 m The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • For example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly.
  • Page 25 Desired Image Size Diagonal (inch) W (cm) x H (cm) <A> 69 x 39 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199 x 112 221 x 125 266 x 149 332 x 187 398 x 224 443 x 249 553 x 311...
  • Page 26: User Controls

    Empowering Acer eView Management Acer eTimer Management Acer Empowering Key provides three Acer unique functions, they are "Acer eView Management"and "Acer eTimer Management" respectively. Press " key for more than one second to launch the Onscreen display main menu to modify its function.
  • Page 27: Onscreen Display (Osd) Menus

    Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the remote control. • When the OSD is displayed, use the main menu.
  • Page 28: Color Setting

    Color setting Display Mode There are many factory presets optimized for various types of images. • Bright : For brightness optimization. • Standard: For brighter environment. • Vivid Cinema : For brighter & general movie content • Dark Cinema : For dark movie content •...
  • Page 29: Image Setting

    Tint Adjusts the color balance of red and green. • Press • Press Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. Image setting Keystone Adjust image distortion caused by tilting projection. (±40 degrees) Use this function to choose your desired aspect ratio. Aspect Ratio •...
  • Page 30 Rear-Desktop • When you select this function, the projector reverses the image so you can project from behind a translucent screen. Rear-Ceiling • When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection.
  • Page 31: Management Setting

    Management setting ECO Mode Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Auto Shutdown The projector will automatically shutdown when there is no signal input after the allocated time.
  • Page 32 Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Disable Power button • When "ON" is selected, only the Power Key on the remote control can be used. If "OFF" is selected, then the Power Key on either the remote control or the control panel can be used to control the projector.
  • Page 33: Audio Setting

    Audio setting Volume • Press • Press • Mute Choose "On" to mute the volume. • Choose "Off" to restore the volume. Power On/Off Volume • Select this function to adjust the notification volume when turning the projector on/off. Alarm Volume •...
  • Page 34: Language Setting

    Language setting Language Choose the multilingual OSD menu. Use the to select your preferred menu language. • Press to confirm the selection.
  • Page 35: Appendices

    Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem No image appears • onscreen •...
  • Page 36 Partial, scrolling • or incorrectly • displayed image (For notebooks) • The screen of the • notebook computer is not displaying your presentation • Image is unstable • or flickering • Image has vertical • flickering bar • Image is out of •...
  • Page 37: Problems With The Projector

    Image is too small • or too large • • Image has slanted • sides • Image is reversed • Problems with the Projector Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Adjust the zoom lever on the front of the projector.
  • Page 38: Osd Messages

    OSD Messages Condition Message Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime.
  • Page 39: Led & Alarm Definition Listing

    LED & Alarm Definition Listing LED Messages Message Input Power Plug Flash ON to OFF 100ms Standby Power button ON Lamp retry Power off (Cooling state) Power button OFF: Cooling completed; Standby Mode Error (Thermal Failure) Error (Fan lock) Error (Lamp breakdown) Error (Color Wheel fail) Power LED Quick Flashing...
  • Page 40: Replacing The Lamp

    Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!"...
  • Page 41: Ceiling Mount Installation

    Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.
  • Page 42 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Large Washer Projector Bracket Supports projector and allows - for adjustments Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.
  • Page 43 Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B Diameter (mm) H5350 Tightening Screw Allen Key Allen Key Tightening Screw Washer Type...
  • Page 44: Specifications

    Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance...
  • Page 45 Standard package contents * Design and specifications are subject to change without notice. • AC power cord x1 • VGA cable x1 • Composite video cable x1 • Remote control x1 • Battery x 1 (for remote control) • User's guide (CD-ROM) x 1 •...
  • Page 46: Compatibility Modes

    Compatibility modes A. VGA Analog VGA Analog - PC Signal Modes Resolution 640x480 640x480 640x480 640x480 720x400 720x400 SVGA 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 SXGA 1152x864 1152x864 1152x864 1280X1024 1280X1024 1280X1024 1280X1024 QuadVGA 1280x960 1280x960 SXGA+ 1400x1050 UXGA...
  • Page 47 i Mac DV (G3) 1024x768 VGA Analog - Extended Wide timing Modes Resolution WXGA 1280x768 1280x768 1280x768 (Native) 1280x720 1280x800 1440x900 1680x1050 B. HDMI Digital HDMI - PC Signal (same as DVI) Modes Resolution 640x480 640x480 640x480 640x480 720x400 720x400 SVGA 800x600 800x600...
  • Page 48 800x600 1024x768 1152x870 1280x960 PowerBook G4 640x480 640x480 800x600 1024x768 1152x870 1280x960 i Mac DV (G3) 1024x768 HDMI - Extended Wide timing (same as DVI) Modes Resolution WXGA 1280x768 1280x768 1280x768 (Native) 1280x720 1280x800 1440x900 1680x1050 HDMI - Video Signal Modes Resolution For TWN/USA SKU...
  • Page 49: Regulations And Safety Notices

    Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 50: Declaration Of Conformity For Eu Countries

    Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. (Please visit http://global.acer.com/support/certificate.htm for complete documents.)
  • Page 51 European Union (EU) R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: • Article 3.1(a) Health and Safety EN60950-1:2001 • EN50371:2002 • Article 3.1(a) Health and Safety • EN60950-1:2001 • EN50371:2002 (SAR, general FR device) • • Article 3.1(b) EMC EN301 489-1 V1.4.1 (common technical requirement) •...
  • Page 52: Declaration Of Conformity

    Machine Type: Name of Responsible Party: Address of Responsible Party: 333 West San Carlos St. Contact Person: Phone No.: Fax No.: Acer America Corporation 333 West San Carlos St., San Jose CA 95110, U. S. A. 254-298-4000 Tel : 254-298-4147 Fax : www.acer.com...
  • Page 53 Declaration of Conformity Acer Computer (Shanghai) Limited 3F, No. 168 Xizang medium road, Huangpu District, Shanghai, China Contact Person: Mr. Easy Lai Tel: 886-2-8691-3089 Fax: 886-2-8691-3000 E-mail: easy_lai@acer.com.tw Hereby declare that: Product: DLP Projector Trade Name: Acer Model Number: D7P0715...

Table of Contents