Asus PCI-AS300 User Manual page 30

IV. ADAPTEC EZ-SCSI UTILITY
3. To create a new partition on the disk device, press Ins. A screen similar to this
appears:
Select SCSI Device to Partition
HA #0 - Target 0
HA #0 - Target 4
Logical Drive Info
64 head
32 sectors/track
85 cylinders
512 bytes/sector
85 megabytes
2AEEFh blocks
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
The Create a DOS Partition window suggests that you create one partition on
the disk device, equal to its entire capacity. If this is what you want to do, skip
to step5.
4. To change the size of the partition, use the arrow keys to select Start Cylinder
and End Cylinder, and type in the numbers you want. Partitions up to 2Gigabytes
are supported.
5. When the number of cylinders is what you want, press Esc. When the confir-
mation prompt appears, select Yes and press Enter to create the partition.
To create more partitions on the same disk device, repeat steps 3, 4, and 5. As
you create partitions on the disk, they are added to the window at the upper
right of the screen, as shown here:
Select SCSI Device to Partition
HA #0 - Target 0
HA #0 - Target 4
Logical Drive Info
64 head
32 sectors/track
85 cylinders
512 bytes/sector
85 megabytes
2AEEFh blocks
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
6. Press Esc to return to the Select SCSI Device to Partition window. If you want
to partition a different disk device, select the device from the list and repeat the
earlier steps.
7. To quit afdisk, press Esc and select Yes to confirm that you want to quit.
24
Adaptec SCSI Disk Setup Program v3.33
Type Start
QUANTUM LP105S 910109405
IOMEGA BETA90
Create a DOS Partition
Start Cylinder:
End Cylinder:
Adaptec SCSI Disk Setup Program v3.33
Type Start
DOS
QUANTUM LP105S 910109405
IOMEGA BETA90
ASUS PCI-AS300 User's Manual
End Megs
0
84
End Megs
0 84 85