IV. ADAPTEC EZ-SCSI UTILITY
Welcome to Adaptec EZSCSI ® 4.00e Adaptec EZSCSI gives you what you need to
use your SCSI devices most effectively with Windows ® 95 and WindowsNT™. You
can also use Adaptec EZSCSI on computers running DOS, Windows ® 3.1x, or Win-
dows for Workgroups3.1x.
Quick Start Instructions
First, install SCSI devices (see the hardware documentation for details). Then fol-
low the instructions for your operating system software in one of the following sec-
tions. We recommend that after you install Adaptec EZSCSI you run SCSITutor to
learn more about the features of SCSI.
Windows95 or WindowsNT
If you want to install Windows95 or WindowsNT on a new computer system, you
may not be able to access your SCSI CDROM drive at first. (Usually, you install
Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM
drive, follow the DOS Quick Start instructions. Then reboot your computer and
follow these instructions:
1 Install Windows95 or WindowsNT version 3.51 or above, and start it running
on your computer.
2 Insert the installation CD into your CD-ROM drive.
3 Double click My Computer and your CD drive icon.
4 Double click SCSI\EZSCSI\ folder and Setup.exe
5 Follow the instructions that appear on the screen.
Windows 3.x
1 Install Windows3.1x or Windows for Workgroups3.1x and start it running on
your computer.
2 Insert the installation CD into your CD-ROM drive.
3 Double click File Manager and your CD drive icon.
4 Double click SCSI\EZSCSI\ folder and Setup.exe
5 Follow the instructions that appear on the screen.
DOS
1 Install DOS6.x or above and start it running on your computer.
2 Insert the installation CD into your CD-ROM drive.
3 Change to your CD ROM drive letter.
4 Change to the SCSI\EZSCSI\ folder and run Install.bat
5 Follow the instructions that appear on the screen.
ASUS PCI-AS300 User's Manual
17