Advertisement
Quick Links
Advertisement
Related Manuals for Saramonic SmartRig Plus
Summary of Contents for Saramonic SmartRig Plus
- Page 1 SmartRig+ Two-channel Mic&Guitar Interface For DSLR cameras, camcorders, iOS and Android devices...
-
Page 2: Product Introduction
Product Introduction 1 General Introductions The Saramonic SmartRig+ is a microphone/guitar interface for recording sound. It allows you to connect professional microphones/guitars to create music with your iPhone, iPad, iPod touch and Android devices, or record quality audio to your DSLR cameras and camcorders. - Page 3 2 Highlights • Two XLR mic inputs • Two 1/4" (6.35mm) guitar inputs • Two 1/8" (3.5mm) inputs • Mono/Stereo switch (M/S) • Camera/Phone switch • +48V phantom power • 3.5mm headphone output for monitoring • Gain control...
-
Page 4: Specifications
3 Specifications Frequency Response 20 Hz to 20 Khz, +/-0.5 dB less than 0.01% @ 1 kHz, -30 dBu input 80 dB @ 1 kHz, -30 dBu input 1x XLR mic input Input1 1 x 1/4" (6.35mm) guitar input 1 x 1/8" (3.5mm) input" 1 x XLR mic input Input2 1 x 1/4"... - Page 5 4 Product Structure Input1: For Microphone: One balanced XLR input One 1/8" (3.5mm) mono input For Guitar: One 1/4" (6.35mm) mono standard input Input2: For Microphone: One balanced XLR input One 1/8" (3.5mm) mono input For Guitar: One 1/4" (6.35mm) mono standard input Note: Other instruments with 1/4’’...
- Page 6 M/S switch Select mono/stereo output mode When recording on one channel, use the mono (M) setting. The signal will be sent to both left and right channels. When recording on two channels, use the stereo (S) setting. The level of each channel can be controlled individually.
- Page 7 LED Indicator When turn on the SmartRig+, the green indicator is on. When choose +48V phantom power, the red and green indicators are both When it is low battery, the red and green indicators will be dim. ON/OFF/+48V Switch Select the ON/OFF switch to turn on/ off the SmartRig+.
- Page 8 5 Quick Start Guide a. Install a 9V battery. Gently slide out the battery cover in the direction of the arrow at the back of unit. Insert the battery with the “+” positive terminal lined up with the “+” indicator on the battery compartment. b.
- Page 9 g. If your microphone needs phantom power, please slide the power switch to the +48V position. The red and green indicators are both on. h. Please connect your headphone to the headphone jack in case you need to monitor recording. i.
- Page 10 7 Compatibility Compatible with iPhone/iPad/iPod touch, Android devices, all DSLR cameras and camcorders with 3.5mm mic input connector. Any types of microphones: Dynamic, Ribbon, or Condenser. Guitars: All guitars with 6.35mm input connector. 8 Packing List The SmartRig+ ×1 Velcro Strip ×1 User Manual ×1 Warranty Card ×1...
- Page 12 The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.com...