13
Bulb for turn signal, clearance
and standing lamps 21/5 W/
32/3 cp:
The lamps are located below
the bumper.
Loosen securing screws (11)
and remove lens (12).
Depress bulb (13), turn left and
pull out. When replacing the
lens, it must be ensured that
the lug in the lens is at the
bottom.
14
Bulb for fog lamp (H3):
Loosen securing screws (15)
and remove housing.
Detach holding spring (16),
remove bulb (14) and discon
nect plug (17).
Electrical System
Tail Lamp Assembly
Remove both knurled nuts in the
trunk and pull off lens assembly.
To replace the bulbs, depress, turn
left and pull out.
1 Backup lamp (21 W/32 cp)
2 Stop lamp (21 W/32 cp)
3 Tail, parking and standing lamp
(10 W festoon lamp)
4 Turn signal lamp (21 W/32 cp)
side marker lamp
(5 W festoon lamp)
8204
71