Teac NT-503 Network Manual page 9

Turning the unit on
If the app is launched when the unit is in standby mode, "Device in
Standby" will appear in the middle of the screen.
Tap the power ( ) button to turn the unit on.
o If NET STANDBY is set to "OFF", the unit will be in a power-saving
mode and turning it on using the app will not be possible.
Set NET STANDBY to "ON" if you want to be able to turn the unit
on with the app (page 17).
o You can also change the network standby setting from the app
(page 8)
EN
9