Download  Print this page

Axor Montreux 16510XX1 Installation Instructions / Warranty

Axor - hansgrohe, inc. faucet installation instructions / warranty.
Hide thumbs

Advertisement

Installation Instructions / Warranty
Axor Montreux
16510XX1
Axor Montreux
16803XX1
Axor Montreux
16511XX1
Axor Montreux
16805XX1

Advertisement

   Related Manuals for Axor Montreux 16510XX1

   Summary of Contents for Axor Montreux 16510XX1

  • Page 1 Installation Instructions / Warranty Axor Montreux 16510XX1 Axor Montreux 16803XX1 Axor Montreux 16511XX1 Axor Montreux 16805XX1...
  • Page 2: Technical Information

    16510XX1 16510XX1 / 16511XX1 Technical Information Recommended water pressure Max. water pressure Recommended hot water temp. Max. hot water temp Hole size in mounting surface valves drain pull rod (16510 / 16511 only) Max. mounting surface depth 16803 / 16805 16510 / 16511 Flow rate *Please know and follow all applicable local plumbing codes when...
  • Page 3 16803XX1 / 16805XX1 16803XX1 16805XX1...
  • Page 4: Installation

    Installation 16510 / 16511 only Position the pull rod assembly in the center hole of the mounting surface. Install the friction washer, metal washer and mounting nut. Tighten the mounting nut by hand. Tighten the tensioning screws. All models Position the faucet body on the mounting surface.
  • Page 5 Install the friction washers, metal washers and mounting nuts. Tighten the mounting nuts by hand. Tighten the tensioning screws. Install the spout, slide bushing and o-ring. Make sure that the slide bushing is oriented correctly. Tighten the spout screw. 16805 / 16511 only: Inspect the alignment of the handles.
  • Page 6 If it is not satisfactory, remove the handle screw using a 3 mm Allen wrench. Remove the handle. Remove the handle and adapter.
  • Page 7 Reposition the handle. Install the handle screw. All models: Lightly coat the handle o-rings with the enclosed lubricant. Install the index caps on the hot and cold handles and pull rod assembly. 16510/16511 only Install the pop-up drain. All models: Connect the supply lines to the stops.
  • Page 8 Install the pop-up drain (16510 / 16511 only) Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. Wrap the threads with Teflon tape and replace. Install the white, flexible sealing gasket to the flange.
  • Page 9: Replacement Parts

    Replacement Parts cross handle screw cover (set) sleeve aerator spout, lavatory hot cartridge – cross handle hot cartridge – lever handle fixation set pull rod diverter knob 10 flange 11 spout, kitchen 1 cold cartridge – cross handle cold cartridge – lever handle 13 lever handle 1 supply hose XX = Color...
  • Page 10: Limited Lifetime Consumer Warranty

    (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.
  • Page 11 THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper mainte- nance, misuse, abuse, negligence, accident or alteration, or () the use of abrasive or caustic cleaning agents or “no- rinse”...
  • Page 12 Hansgrohe, Inc. • 10 Bluegrass Lakes Parkway • Alpharetta, GA 3000 Tel. 0-360-880 • Fax 0-360-88 www.hansgrohe-usa.com...

This manual is also suitable for:

Montreux 16803xx1Montreux 16805xx1Montreux 16511xx1

Comments to this Manuals

Symbols: 0
Latest comments: