Enabling Devices 1454 User Manual page 2

Have lots of fun driving Hello Kitty around. We've created a large, easy-
to-activate remote control with three buttons – forward, turn and
music/sound effects. Great for teaching cause and effect and
encouraging visual tracking. Size: 7"L x 4"W x 5"H. Car requires 4 AA
Batteries; Remote requires 3 AA Batteries. Weight: 2¼ lbs.
Operation: Operation: Operation: Operation:
1. To install the batteries for the remote controller, turn the big button
controller over, remove the small Phillips Head screw from the
battery cover then lift cover off. Install 2 AA batteries making note to
follow proper (+) & (-) battery placement. Replace cover and screw.
Use alkaline batteries only (e.g. Duracell or Energizer brand). Do not
use rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform properly.
Never mix old and new batteries together or different brands or
types together. Set the ON/OFF toggle switch to ON.
2. To install the batteries in the Hello Kitty Car, using a Philips Head
screwdriver unscrew the screw on the bottom of the car, then lift
the cover off. Install 3 AA batteries following proper (+) & (-) battery
placement. As earlier mentioned follow battery recommendation.
Replace the cover and screw. Turn the car's ON/OFF switch located
next to the battery compartment to ON.
3. This remote controller allows the user to move the car forward, turn
and play music/sound effects. Slight pressure on either big button
switch will drive the car in that direction. Once you release pressure
on the switch the car will stop.
4. When you are finished using the Hello Kitty Car turn the ON/OFF
switch on the car and the remote OFF, this will help conserve
battery power and prevent accidental activation.
5. If the Hello Kitty car is not going to be used for a long time, e.g. one
month or longer, we recommend removing the batteries from the
car and controller during storage to prevent battery drain or
Super cute! Super cute! Super cute! Super cute!
leakage, which can cause damage to the Hello Kitty Car and
controller.
Troubleshooting: Troubleshooting: Troubleshooting: Troubleshooting:
Problem: Problem: The Hello Kitty Car is not running. Problem: Problem:
Action: Make sure batteries in the Hello Kitty Car and the controller are Action:
Action: Action:
fresh and installed following proper (+) & (-) battery placement.
Problem: Problem: The Hello Kitty Car is running intermittently.
Problem: Problem:
Action: Replace batteries in the remote control and Hello Kitty Car. Action: Action: Action:
Weak batteries will severely limit the normal transmitting range of your
remote control.
Problem: Hello Kitty Car does not react, or reacts poorly to operation by Problem: Problem: Problem:
transmitter.
Problem: Problem: Loss of control.
Problem: Problem:
Cause: Another Hello Kitty Car operated near your vehicle. Please Cause: Cause: Cause:
Note: do not use two Hello Kitty Cars Note: do not use two Note: do not use two Note: do not use two Hello Kitty Cars near each other. Hello Kitty Cars Hello Kitty Cars
or the control range of distance. (15 to 20 feet.)
Action: Action: Action: Move to another place where interference from another device Action:
or vehicle is not present.
Please Please Please
near each other. Out of sight near each other. near each other.
Rev 2/24 Rev 2/24/15
Rev Rev 2/24 2/24
/15
/15 /15