Advertisement
Quick Links
Problem: Vehicle does not react, or reacts poorly to operation by transmitter.
Cause: High-frequency interference occurred near to high-voltage lines,
transformers and some types of building.
Go Go School Bus - #1004
Action: Avoid these if possible, or choose another place to operate the
vehicle.
Action: Avoid these if possible, or choose another place to operate the
vehicle.
Problem: Loss of control.
Cause: Another radio control vehicle using the same frequency is operated
near your vehicle. Please Note: do not use two Go Go School Buses or our
Fire Engine No. 136 near each other. Out of sight or the control range of
distance. (15 to 20 feet.)
Action: Move to another place where radio frequency interference from
USER'S GUIDE
another device or vehicle is not present.
For Technical Support:
50 Broadway
Call our Technical Service Department
Hawthorne, NY 10532
Monday through Friday, 9 a.m. to 5 p.m. (EST)
Tel. 914.747.3070 / Fax 914.747.3480
1-800-TEC-TOYS or 1-800-832-8697
Toll Free 800.832.8697
www.enablingdevices.com
customer_support@enablingdevices.com
Advertisement
Related Manuals for Enabling Devices Go Go School Bus1004
Summary of Contents for Enabling Devices Go Go School Bus1004
- Page 1 Problem: Vehicle does not react, or reacts poorly to operation by transmitter. Cause: High-frequency interference occurred near to high-voltage lines, transformers and some types of building. Go Go School Bus - #1004 Action: Avoid these if possible, or choose another place to operate the vehicle.
- Page 2 A great first remote control! 3. Place the remote in the remote holder base, and press down to secure Watch our school bus zoom around when you use our palm disk controller. Velcro. This remote controller allows the user to move the School You also can activate the school bus by using your capability switches (1 or Bus forward, and turn in a counterclockwise direction.
Need help?
Do you have a question about the Go Go School Bus1004 and is the answer not in the manual?
Questions and answers