Recording Quality/Condition - RCA 5629403B User Manual

RP5030 EN (B ver)
Recording Quality / Condition
Setting Recording Quality
You can select between three
recording qualities. Default is SP.
Definition
• SP (Standard Play) -
Model RP5030
allows about 520
minutes recording
while model RP5020
allows about 1040
recording
• LP (Long Play) -
Model RP5030
allows about 1040
minutes recording
while model RP5035
allows about 2080
minutes recording
• HQ (High Quality) -
Model RP5030
allows about 260
minutes recording
while model RP5035
allows 520 minutes
recording
1. Press MENU button three times,
(SP, LP or HQ show on display.)
2. Toggle between SP and HQ by
pressing REVERSE or FORWARD.
3. Confirm selection by pressing
MENU or STOP button.
15/11/06 10:28 AM
Setting Recording Condition
You can select between two recording
conditions. Default is DICT.
Definition
• CONF (Conference) - in a more
• DICT (Dictation) - in a more
SP
1. Press MENU two
LP 2. Select recording
3. Confirm selection by
HQ
optimum recording quality, place
the recorder with the microphone
freely exposed to the sound source
as close as convenient. A built-in
automatic recording level control
will set the optimum record level
during manual recording. Avoid
recording near unwanted noise
sources, such as air conditioners or
fans.
Page 15
open area and recording source is
far from the unit.
enclosed area and recording source
is close to the unit.
times until DICT or
CONF show on
display.
condition by
pressing REVERSE or FORWARD.
pressing MENU
button. (You may
press STOP to exit
from further
selection.)
Tip:
For conferences, to obtain
EN
DICT
DICT
10