Advertisement
The Info Menu
Title/chapter (DVD)/track (audio CD)
To directly access a title, chapter (DVD) or a track
Notes:
• When you press STOP, the unit stores the point
(audio CD), press INFO, press OK.
where playback was interrupted. If you press
Select the Title(TT), Track(TRK) or Chapter(CH)
PLAY again, playback resumes from this point.
icon and enter a number directly with the numeric
To stop playback completely or to start again
buttons. Press OK again to confi rm.
from the beginning, press STOP twice. If the
unit is left in STOP mode for more than 5
minutes without any user interaction, a screen
saver is activated. At the end of 30 minutes
without any user interaction, the unit switches
Note: Many discs only have one title.
off automatically.
INVALID KEY will be displayed if the function
•
you select is not available.
Time display
To access the Time Display, press INFO on the
remote. Press the up/down buttons repeatedly to
The Info Menu
display:
1. Press INFO on the remote while a disc is playing
DVD: Chapter Time Elapsed, Chapter Time Remain,
to display the info menu. The fi rst banner shows
Title Time Elapsed and Title Time Remain.
title, chapter, and time display information.
2. Press INFO again for audio language, subtitles,
Audio CD: Track Time Elapsed, Track time Remain,
and camera angle.
3. Press INFO a third time for play mode, bookmark
Disc Time Elapsed and Disc Time Remain.
and sleep timer.
4. Use the right/left arrow buttons on the remote
To directly access a location on the disc which does
to select an icon.
not correspond to the start of a title or chapter,
5. Use the up/down buttons to scroll through the
press INFO once and press OK, highlight the Time
options.
Display icon using the arrow buttons, then enter
a time with the number buttons (hh:mm:ss) and
DVD Info Display
press OK.
Title
Chapter
Time display
TT
CH
Note: Time display function may not
be available on all discs.
Audio language
Subtitles
Camera angle
D
5.1C H
O F F
Play mode
Bookmark
Sleep timer
CD Info Display
Time display
Track
TRK
Play mode
Bookmark
Sleep timer
- 12 -
Jpeg Files
Playing jpeg fi les
6. During the slide show you can use the left/right
button to rotate the picture, the up arrow button
Jpeg fi les are image fi les. Make sure that they have
to rotate the image vertically, the down arrow
a resolution of less than 2 megapixels.
button to rotate the image horizontally. Use
1. Open the disc tray.
the ZOOM button to zoom in/out the picture.
2. Place the disc with the printed side facing up
Use the CH- button to go back to the previous
and close the disc tray.
picture or the CH+ button to go to the next one,
The folders on the disc will be listed in numerical
and the STOP button to interrupt the slide show
order on the left side of the screen. When you
and display the disc's contents.
highlight a folder, then press OK button. The list
7. When the unit has played all the fi les, the slide
of pictures in the folder are listed in numerical
show stops and the disc's contents are displayed
order on the right side of the screen.
again.
3. Press the left arrow button to move to the
8. Press STOP to end playback.
folder lists on the left side of the screen. Select a
folder using the up/down arrow buttons on the
remote control, then press OK button.
4. Press the right arrow button to move to the fi le
list on the right side of the screen. Use the up/
Notes:
down arrow buttons to select a fi le. Press PLAY
• The time taken for the contents of the
to start picture slideshow.
disc to be displayed varies according to
the size and number of jpeg fi les on the
5. The unit starts the slide show with the jpeg fi le
disc. If nothing is displayed after a few
you have selected, then displays all the jpeg
minutes, the fi le sizes may be too large.
fi les in the same folder, then all the jpeg fi les in
Reduce the fi les' resolution and write
the subfolders located in the same folder. You
another disc.
can set the amount of time a picture remains
• Before inserting a disc, make sure it is
on the screen in the Video Setup menu.
compatible with the unit.
- 16 -
Additional Information
• This unit is for domestic use only and must not
Compatible Formats
be used for industrial purposes.
In order to ensure playback, discs must conform
• Total or partial copying of recordings protected
with DVD or CD standards. This unit may not play
by copyright legislation, without the explicit
some recordings or fi les due to differences in
permission of the holder of the rights,
recording formats, software used and disc types.
contravenes
current
legislation.
Copying
DVD-Video
or downloading music fi les for sale or any
Digital video discs - 12 cm, single or
other business purpose constitutes or could
double sided, single or dual layer. DVDs
constitute a violation of copyright law.
are high density optical discs on which
high quality picture and audio are
Cleaning
recorded by means of digital signals.
• Use a soft, dry, clean cloth. Regularly dust the
vents at the back or sides.
DVD-R, DVD-RW, DVD+R, DVD+RW
• Using solvents, abrasive or alcohol-based
Most DVD-R and DVD+R (one recording
products risks damaging the unit.
only), DVD-RW and DVD+RW discs
• If an object or liquid enters inside the unit,
(rewritable), depending on the DVD
unplug it immediately and have it checked by
writer and discs used. Recordings using
an authorized servicer or service center.
DVD-R and DVD-RW discs must be made
in Video DVD mode. Recordings using
Handling and caring for discs
DVD+RW discs must be made in accordance with
• Handle your discs with care. Hold the disc with
the specifi cations for DVD+RW discs with a 4.7 GB
your fi ngers at the edges or through the hole.
capacity.
• Insert the disc with the label facing up (for a
single-sided disc).
Audio CDs
• Place the disc properly into the tray in the
Audio CDs (12 cm).
allotted holder.
• Use a soft cloth to clean discs if necessary,
CD-R, CD-RW
always wiping from the centre to the edge.
Most CD-R (one recording only) and
• Always put discs back in their cases after use
CD-RW discs (rewritable).
and store in a vertical position.
• Do not close the tray with two discs in it or with
CD-Rs written during a multisession recording can be
a disc not sitting correctly in the holder.
played, provided that the session has ended before
• Do not play cracked, chipped or warped discs
the disc is played (depending on the write software).
nor try to repair them with adhesive tape or
However, depending on the condition of the CD-
glue.
writer, computer and the disc used, you may fi nd
• Do not write on a disc.
that not all discs will play. When playing a CD-R disc,
• Do not move the unit when a disc is being
it is normal for the unit to take up to 60 seconds to
played.
recognize the disc before starting to play.
• Do not scratch discs or store them in places
If the disc is not recognized after a period of 120
exposed to direct sunlight, high humidity or
seconds, remove the disc, and insert it again.
high temperatures.
• Do not use its full capacity.
• Do not use aerosol cleaners, benzene, anti-static
• CD-Rs should be preferably used instead of CD-
liquids or any other solvent for cleaning discs.
RWs (rewritable CDs) as, in certain cases, CD-RW
When cleaning, wipe gently with a soft damp
playback may be faulty.
(water only) cloth from the centre to the edge,
• Use reliable, good-quality CD write software.
avoiding circular motions, which could cause
• Close all other applications on the computer to
scratches and interference during playback.
ensure reliable CD-R disc recording.
- 20 -
The Info Menu
Audio (DVD)
Camera angle (DVD)
Some discs have several audio tracks used for
Some discs off er diff erent camera angles for
diff erent languages or diff erent audio formats.
specifi c scenes.
1. To change the camera angle, press the ANGLE
To change the language or audio format during
button on the remote or press the INFO button
playback:
twice and select the Camera angle icon with the
1. Press the INFO button twice.
left/right buttons.
2. Use the left/right arrow buttons to select the
2. Choose the angle with the up/down arrow
Audio icon, or press the AUDIO button on the
buttons.
remote control.
3. Choose a language or an audio format with the
If the disc was recorded using a single camera
up/down arrow buttons.
angle, this function is not available.
This option is only available if the disc off ers dialog
languages or audio formats. When you change
Play mode (all discs except jpeg)
the dialog language using the Info menu, it only
1. While the disc is playing, press the INFO button
changes the dialog language of the disc being
twice for CD and three times for DVD.
played. When you eject the disc or switch off
2. Select the Play Mode icon using the left/ right
the unit, the language will revert to the one you
arrow buttons.
selected in the language Setup menu.
3. Use the up/down arrow buttons to select an
option.
Subtitles (DVD)
• DVD play modes: standard, program, A-B
Subtitles are turned off by default. Turn on subtitles
repeat, title repeat, chapter repeat. Program
as follows:
play mode is only available if a program list
1. While the disc is playing, press INFO twice, then
has been created (see below). Repeat mode is
select the Subtitles icon using the left/right
only available with discs that display elapsed
arrow buttons.
time and remaining time. To repeat a sequence
2. Select a language using the up/down arrow
between points A and B, choose the A-B repeat
buttons.
option, and then follow the instructions for
3. To turn subtitles off , select the off option or
entering the two points.
press SUBTITLE on the remote.
• Audio CD play modes: standard, introscan,
random, program, repeat A-B, repeat disc,
When you change the language of the subtitles
repeat track.
using the Info menu, it only applies to the disc
currently being played. When you eject the disc
4. To stop repeat playback, select the Play Mode
and switch off the unit, the subtitles will default
icon and use the up/down arrow buttons to
to the subtitle language you selected in the
choose the Standard option.
Languages menu.
This function may not be available on all discs.
- 13 -
The Setup Menu
There are four options in the main setup menu:
Default
General Setup, Language Setup, Audio Setup and
This option allows you to return the unit's settings
to the original factory settings. Any changes you
Video Setup.
have made to the unit's settings will be reverted
Press SETUP to bring up the main menu. Select
back to the original settings.
one of the menu icons across the top of the screen
using the left/right arrow buttons. The menu's
IMPORTANT!
options are displayed on the left side of the
Once Progressive Scan has been activated, an
screen. Press the right arrow button to move to the
image will only be visible on a progressive scan
option's choices on the right. Press SETUP if you
TV or monitor. If you choose this option and you
want to exit setup.
don't have a progressive scan TV or monitor,
you may get a picture with incorrect color or
General Setup
no color.
Language Setup
With this menu, you can set the language for unit
menus, dialog, subtitles and the disc menus.
If you chose "English" during initial set-up, any
menus generated by the disc are in English, and
so is the language of the dialogs (if this language
is available on the disc).
Video
Progressive Function provides high quality
pictures with less fl ickering. Turn on Progressive
Scan if you used the Component Video jacks of the
unit to connect a TV or monitor compatible with a
progressive scan signal.
Select P-Scan YPbPr and press OK to activate
1. Select the Language Setup icon in the main
Progressive Scan.
menu using the left/right arrow buttons.
HDMI Setup
2. Select one of the options using the up/down
This lets you select the resolution of the player's
arrow buttons.
3. Press the right arrow button to move to the
output according to the connected TV.
language choices.
• Supported HD JPEG mode: 480p, 720p, 1080i
4. Use the up/down arrow buttons to highlight
and 1080p.
the language of your choice and press OK.
TV Type
Player Menu
Depending on the format of the DVD disc, you can
Select the language of player menus and press
choose the picture format (aspect ratio) best suited
OK.
to the format of your TV screen:
Audio
• 4:3 PS: reproduces a 4:3 picture without
Select the dialog language using up/down arrow
distortion.
buttons and press OK.
• 4:3 LB: gives best reproduction of pictures recorded
To change the Audio language during playback,
in this format (i.e. with horizontal bands at the top
press INFO twice for DVD and use the left/right
and bottom of the screen) or in 16:9.
arrow buttons to highlight the Audio icon.
• 16:9 (widescreen): reproduces 16:9 format fi lms
Press the up/down arrow buttons or AUDIO on the
in full on a 16x9 screen.
remote control to select audio language.
- 17 -
Additional Information
Jpeg fi les
Technical Specifi cations:
RMS Output Power: Dolby Digital Mode with 10%
CD-R and CD-RW with jpeg fi les. Certain jpeg fi les,
Total Harmonic Distortion
in cluding progressive jpeg fi les, cannot be read by
Rear Channels: 1kH, 4Ω
this unit.
Front and Center Channel: 1kHz, 4Ω
When composing your title, use 10 characters or less,
Subwoofer Channel: 100Hz, 3Ω
no spaces, and avoid the use of special characters
including (. , / , \ , = , +).
Muting Attenuation: 70 dB
The total number of fi les and folders on the disc
Frequency Response:
should be less than 650.
200Hz – 20KHz/3dB, 1KHz ref.
Subwoofer Frequency Response:
Make sure that fi les have the ".jpg" extension. Files
20Hz – 200Hz/-3dB, 100Hz ref.
without the ".jpg" extension will not be able to be
Signal to Noise Ratio: 70 dB (Dolby Digital)
read by the unit --- even thought the fi les are shown
as jpeg images on your computer.
AM Tuner Section:
Frequency Response: 2kHz +/-3dB, 400Hz ref.
Sound Enhancement Systems
Usable Sensitivity: 3000uV/m @ S/N 20dB
This receiver is equipped with several built-in
Signal to Noise: 38dB
sound enhancement systems.
IF Rejection: 35dB
DVD+Rewritable
Manufactured under license
FM Tuner Section:
from Dolby Laboratories.
"Dolby", "Pro Logic", and
Frequency Response: 15kHz +/-3dB, 1kHz ref.
the double-D symbol
Quieting: 24dB
are trademarks of Dolby
Signal to Noise: 62dB(stereo) / 65dB(mono)
Laboratories.
IF Rejection: 70dB
Dolby Pro Logic
Dimensions (W x D x H mm) :
The Pro Logic mode uses the built-in circuit to steer
Unit: 430 x 240 x 66
the Left, Center, Right and Mono Surround channel
Front Speakers: 110 x 85 x 110
audio signals and uses all fi ve speakers to play both
Center Speaker: 140 x 85 x 110
stereo and Dolby Pro Logic program source, such
Rear Speakers: 110 x 85 x 110
as TV and VCR.
Subwoofer: 169 x 288 x 330
You can use this mode with any stereo program
source (such as VCR/TV) to enjoy multi-channel
sound experience.
Dolby Digital
The Dolby Digital mode lets you enjoy full digital
surround from software processed in the Dolby
Digital format. Dolby Digital provides better
sound quality and a more powerful presence
than conventional Dolby Surround. This unit is
equipped with Dolby Digital 5.1-channel so that
you can enjoy enhanced full digital surround
sound. The new system provides stereo separation
of the rear speakers (Rear-Right, Rear-Left). Adding
the subwoofer channel to the 5 channels for bass
sounds (counted as 0.1 channel) results in 5.1
channels (or 6 Channels) that bring you the most
sophisticated Dolby Digital sound enjoyment.
- 21 -
The Info Menu
Creating a Program List for Program
Introscan (CD)
This option plays the fi rst ten seconds of each track
Play Mode (Audio CDs and DVD discs)
on a CD.
To use program play mode, you must fi rst create
1. Press the INFO button twice, then select the Play
a program list.
mode icon with the left/right arrow buttons.
1. To create a program list, press the INFO button
2. Press the up/down arrow buttons to select the
twice for CD and three times for DVD. Highlight
INTRO option and press OK to start IntroScan.
the Play Mode option and press the up arrow to
3. Press STOP to stop Introscan, and press PLAY to
select the Program option.
resume normal playback.
2. Press OK. The Program screen is displayed.
3. The fi rst spot in the list is highlighted. Use the
Bookmark (DVD and audio CD)
number buttons on the remote to enter a track
1. Press INFO twice for CD and three times for DVD.
number. As for DVD discs: T stands for Title while
Select the Bookmark icon with the left/right
C stands for Chapter. As for Audio CDs: T stands
buttons, and press OK. A menu is displayed with
for Track.
fi ve bookmarks.
4. Use the arrow buttons to move to the next spot
2. The fi rst bookmark space is highlighted. Press
in the list. Enter the next track number.
OK to set the bookmark. The bookmark is saved
5. Continue entering tracks until you have
and is indicated by the number 1. You can set up
completed your list.
to fi ve bookmarks on a disc.
6. Highlight the Play option at the bottom of
3. To start playback from a bookmark, press the
the screen and press OK or press PLAY to start
PLAY button on the remote.
playback. The program list will play in the order
4. To delete a bookmark, highlight it and press
you programmed it.
CLEAR.
To stop program play, press STOP or select Standard
from the Play Mode option in the INFO display.
Note: This function is only available
If you want to cancel the list, repeat Steps 1 and 2
with discs whose elapsed time or remaining
to select CLEAR and press OK.
time appears in the Info menu.
Sleep
1. Press INFO twice for CD and three times for
DVD.
Select Sleep icon with the left/right arrow
buttons.
2. Select one of the available options using the OK
button : Off, 30, 60, 90 or 120 minutes.
Note: This function is not available
AUX IN / LINE IN / OPTICAL / TUNER
mode.
- 14 -
The Setup Menu
Subtitles
Night Mode
Select the subtitle language using up/down arrow
You can use this function to limit the volume on loud
passages of movies (such as action sequences) while
buttons and press OK.
still allowing you to hear quiet passages (such as
To change the language of the subtitles during
dialog). You can choose between Quiet, Moderate or
playback, press INFO twice for DVD and use the
Off .
left/right arrow buttons to highlight the Subtitle
Center Delay / Rear Delay
icon. Press the up/down arrow buttons or the
SUBTITLE button on the remote to select a subtitle
Basic settings have been preset for the speakers included
with your unit. However, to suit the acoustic conditions
language.
in your listening room and to make the sound more
Disc Menu
eff ective, you may need to delay the signal coming from
To change the language of the disc menus, select
some of the speakers. Channel delay compensates for
centre or surround speakers that are closer to the listening
the language using the up/down arrow buttons
position than the front speakers.
and press OK.
1. Highlight the Center Delay/Rear Delay option using
The language you select will only be displayed if
the up/down arrow buttons.
the disc is programmed with that language.
2. Press the right button to move to the default
distance.
3. Press the up/down buttons to adjust the distance.
Notes:
Test Tone
• If the selected language is not available
This function is used to test and adjust the volume level
(gain) for each individual speaker channel.
on a disc, the disc's language will be used
Use
/
to select the speaker channel you wish to
instead.
test and adjust. You'll hear a test tone come from the
• If the language chosen is available, it is
speaker you select. Use the VOL button to adjust the
automatically selected when you display
level to your desired setting.
the subtitles or press SUBTITLE on the
Press OK button to exit this function.
remote control. Otherwise, the subtitle
Video Setup
language indicated on the disc is selected.
1. Select the Video icon in the main menu using the
left/right arrow buttons.
2. Select a menu option using the up/down arrow
Audio Setup
buttons and press OK.
You can adapt your unit to other equipment and
access specifi c functions with the Audio Setup
menu.
1. Select the Audio Setup icon in the main menu
using the left/right arrow buttons.
2. Select an option using the up/down arrow
buttons. Press the right arrow to move to the
option's choices.
Slide Time
The Slide Time option lets you select the amount
of time a picture is displayed in a slide show. The
choices are 5 seconds, 10 seconds, or 15 seconds.
- 18 -
Limited Warranty
AVC MULTIMEDIA ("AVC") makes the following limited warranty. These limited warranties extend to the
original consumer purchaser and is limited to non-commercial user of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects in materials or
workmanship for a period of one year from the date of their original retail purchase. If the unit fails to
conform to this warranty, we will service the product using new or refurbished parts and products, at
AVC's sole discretion.
During a period of one year from the eff ective warranty date, AVC will provide, when needed, service
labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the
United States, you must fi rst call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873,
during the hours listed in the box below. The deternination of service will be made by AVC customer
support.
PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or
remanufactured replacements for defective parts or products will be used for repairs by AVC at its
designated Service Center for one year from the defective warranty date. Such replacement parts or
products are warranted for an additional one year from the date of repair or replacement. The Customer
will be required to ship the unit to the Service Center indicated at the time Customer Support is
contacted to make the necessary repairs. The customer is responsible for all transportation charges to
the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing
material or an equivalent as designated by AVC.
Your Responsibility
(1) You must retain your bill of sale to provide proof of purchase.
(2) These warranties are eff ective only if the product is purchased and operated in the U.S.A. or Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or
parts which have been lost or discarded, or damage to product or parts caused by misuse, accident,
improper operation or maintenance, or use in violation of instructions provided with the product,
or to product which has been altered or modifi ed without authorization of AVC, or to products or
parts thereof which have had the serial number removed or changed.
Out of Warranty
In the event your product requires repair after the limited warranty period has expired, please contact
www.RCAav.com
our Customer Support Center at 1-800-506-5746, 1-877-252-6873 or
Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm, Saturday: 9am-NOON Eastern time.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of the product to
our Product Returns Center.
- 22 -
Radio
The unit has a built-in tuner that allows for FM
radio function. The AM loop antenna allows for AM
Tips:
radio function.
• When the FM station broadcasts Stereo
Manual tuning
sound is found, ST is displayed.
1. Connect the FM antenna and the AM loop
• When you manually tune into a weak FM
antenna at the back of the unit.
station, press AUDIO on remote control to
2. Press TUNER.
switch from Stereo to Mono mode. This
3. Tune a station by pressing TUNER+/-repeatedly
will reduce the background noise.
until the desired station is found. Alternatively,
• If there is any interference, change the
you can press and hold the same buttons down
antenna's position until ideal sound
for about two seconds to activate the automatic
reception is obtained. TV and other
search function. In this mode the unit will
electronic devices could be the cause
automatically tune frequencies until it fi nds a
of interference, so try to position the
station.
antenna away from them.
4. Repeat step 3 to tune to another radio station.
• A weak signal can aff ect the "Automatic
5. Press TUNER to toggle between FM and AM.
preset programming" function's effi ciency.
Adjust the antenna for better reception
Storing radio stations
and a more effi cient search.
The unit can store up to 30AM/30FM radio stations
in its memory. You can enter every single radio
LINE IN/AUX IN/OPTICAL IN
station yourself or the unit can store all available
radio stations automatically in ascending order.
TV, VCR or Set Top Box can be connected to AUX
IN / OPTICAL IN input jacks at the back of the unit
Automatic preset programming
or LINE IN at the front panel so that sound from
1. Press TUNER to enter the Tuner mode.
the auxiliary component comes into the unit and
2. Press and hold TUNER for two seconds to start
out through the speakers.
automatic preset programming.
Connecting auxiliary components
3. Radio frequencies will be browsed and radio
Refer to "Getting sound from external sources
stations stored automatically. When all the
such as TV" for details on connecting the auxiliary
available radio stations are stored or all
components to the unit.
30AM/30FM memory locations are full, the auto
preset programming function will stop.
Selecting LINE IN / AUX IN / OPTICAL
mode
Manual preset
Press either SOURCE on the main unit or LINE-IN/
1. Tune to a radio station (see "Manual tuning" for
AUX/OPTICAL on the remote control to select
details).
LINE IN, AUX IN or OPTICAL mode.
2. Press MEMORY. While the Program Preset
Sound output in AUX IN mode (or LINE
number is still fl ashing, input your desired
IN/OPTICAL mode)
preset number using the numeric buttons, then
• You may change the Surround Sound setting
press MEMORY to store it.
from 5.1 ch to Stereo mode if you like (see
instructions under "Overview of Controls").
Retrieving preset stations
However, we recommend you leave the system
1. Press TUNER to enter the Tuner mode.
in full 5.1 CHANNEL surround mode.
2. Press CH +/- to search up or down for the preset
• If the AUX IN (or LINE IN/OPTICAL IN) audio
stations or directly press the numeric buttons.
signal is mono, you may not receive audio on
all speakers.
- 15 -
Additional Information
Troubleshooting
I can't fi nd my fi le in the jpeg listing.
• Make sure the fi le name is valid.
The unit does not switch on.
• Make sure it is plugged in.
The remote control does not work or works
• Press the ON•OFF button on the remote control
only intermittently.
or the ON/STANDBY button on the front of the
• Check that batteries are inserted or change
unit.
them.
The device switches off spontaneously.
• Aim the remote control at the unit. The infrared
• The device switches off automatically when it is
beam must not be blocked or interrupted.
in STOP mode for more than 30 minutes without
• Check that the remote control is confi gured
any user intervention. Switch it on again.
to control the device you are trying to operate
• It might be impossible to read the disc.
with it.
• Insert the disc with the printed side facing up.
• Check that the disc can actually be played by
The subtitles do not appear.
this device.
• Check that the DVD disc provides subtitles.
• Check that the disc's regional code matches the
• Refer to the section on how to display
unit's regional code. This unit's regional code is
subtitles.
1.
• Clean the disc.
The disc menu language is not the correct one.
• The disc menu language has not been set up.
There is no picture.
• Check you have switched on the TV set.
• The language of your choice is not available
• Check the connections.
on the disc .
• Select the AV input assigned to the unit on the
TV.
Precautions
• Replace the HDMI cable with a better one. Bad
Use
HDMI cable can cause data lost.
• If your unit has been stored in a cool place for any
• Press HDMI button on remote handset several
length of time, during a journey for example, wait
times to toggle among diff erent HD OUTPUT.
for about 2 hours before using it.
• The openings located on the top and
The picture is of poor quality (with snow or
bottom are for ventilation and must not be
lines).
obstructed.
• Check the connections.
• During thunderstorms, we recommend that
There is no sound or the sound is of poor
you isolate the unit from the electrical supply
quality.
so that it is not damaged by electrical or
• Check the connections.
electromagnetic surges.
• Make sure the speakers are connected.
• This unit is designed for continuous use.
• Make sure the MUTE function is not on.
Switching off the unit to standby mode does
No surround sound.
not disconnect it from the mains supply. To
• Check to see if system is actually in 5.1 Channel
completely isolate the equipment, remove the
Surround mode. To do this, press the SURROUND
plug from the mains jack as some components
button on the remote control - the front panel
remain connected to the electrical supply.
display should indicate the current setting (5.1
• If you notice any burning or smoke, disconnect
ch or Stereo). If current setting is Stereo, the
the unit immediately to avoid any risk of
surround speakers and center speaker will be
electrocution.
inactive. You should switch the system to 5.1
• Do not attempt to look inside the unit through
Channel Surround setting (see instructions
the disk tray opening or any other opening.
under "Overview of Controls").
You may be electrocuted or exposed to laser
radiation.
- 19 -
Limited Warranty
All warranties implied by state law, including the implied warranties of merchantability and fi tness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive
and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer
or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for
consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms
of these warranties in any manner whatsoever. The time within action must be commenced to enforce
any obligation of AVC arising under the warranty or under any statute, or law of the United States or any
state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to
implied warranties arising under state law.
This warranty gives you specifi c legal rights and you may also have other rights, which may vary from
state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action
may be brought, or the exclusion or limitation of incidental or consequential damages, so the above
provisions may not apply to you.
For more information on other products and services, please contact our web site at
Important: Also keep your "Bill of Sale" as proof of purchase.
Model no. ................................................................................ Product name ...........................................................................
Type of set ............................................................................................................................................................................................
Serial no. .................................................................................. Invoice no. ................................................................................
Date purchased ..................................................................... Dealer name ..............................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT www. RCAav.com
Specifi cations and external appearance are subject to change without notice.
Need more help?
Please visit online help at http://www.RCAav.com
www.RCAav.com
Print in China
811-325W91W031
Advertisement
