Table of Contents
Advertisement
Connecting Your TV to a receiver with Dolby
If you own a receiver with Dolby
optical cable-type input, connect an optical cable for excellent audio quality.
Digital Optical
cable
•
Setting Up Your TV
•
Plug in the TV.
Note: When you first plug your TV into an outlet, the Power indicator on the front panel will
light and blink for approximately 30 seconds and then go off during the initialization of the TV.
This happens only when the TV is unplugged and plugged back in. The TV can only be turned
on after the Power indicator goes off.
•
Put batteries in the remote.
•
Turn on the TV.
MENU
Use these buttons during the assisted Setup
Tip
To access the initial setup menus at a later time, press
MENU, choose Setup Options, then Assisted Setup.
SUBCHANNEL
REVERSE
PLAY
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Chapter
RECORD
STOP
CC
PRESETS
SOUND
SUBTITLE
ANGLE
AUDIO
Connect one end of the optical cable to the DIGITAL AUDIO OUTPUT (OPTICAL) jack on your
TV and to the Digital Optical Input jack on your receiver/amplifier receiver.
• If your receiver can decode Dolby digital and PCM, go to the Audio menu, select Advanced
Audio menu, then Digital Audio Output. Select AutoSelect (recommended) or PCM.
• If your receiver can decode only PCM, select PCM.
remote Control Buttons Used for the
assisted Setup
To use the TV's menus, first press the TV button on the remote control to put
TV
the remote in TV mode. When the Assisted Setup screen appears, use the arrow
buttons to highlight one of the items listed in the menu. Use the up or down
arrow button to move up or down. Use the right or left arrow button to move
right or left.
To select the item that you've highlighted, press OK.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter, or a different color).
CLEAR
Complete the assisted Setup
Your TV's menu system allows you to customize your TV's features. On-screen
information helps you choose settings to match your setup. The first time you
turn on your TV, the Assisted Setup screen appears automatically. Press OK to
begin the setup.
SKIP
FORWARD
PAUSE
Connections & Setup
®
digital decoding or PCM (Pulse-Code Modulation) that uses an
®
Digital
Advertisement
Table of Contents
