Seneca Z-MODEM-3G Installation Manual

2g and 3g modem, gsm850, egsm900, dcs1800, pcs1900, wcdma900 and 2100 frequency

Advertisement

Quick Links

INSTALLATION MANUAL

Manual language
Series
Product
Description
Contents
Manufacturer
WEB
Mail
This document is the property of SENECA srl. Unauthorized duplication and reproduction
is strictly forbidden. The content of this document corresponds to the described products
and technologies. Stated data may be modified or supplemented for technical and/or
sales purposes.
Programming tools, manuals, templates, examples, etc. for the product can be
downloaded free of charge from www.seneca.it/products/z-modem-3g.
2G and 3G modem, GSM850, EGSM900, DCS1800,
PCS1900, WCDMA900 and 2100 Frequency
2
2
2
3
3
3
3
3
3
4
4
4
4
5
5
6
6
7
7
7
8
8
Technical support:
Product information:
MI003781-E.DOCX
Z-MODEM-3G
Registered office: Via Austria 26
35127 - Z.I. - Padua - I
Tel +39.049.8705355- 8705355
Fax +39 049.8706287
supporto@seneca.it
commerciale@seneca.it
English
Z-PC
Seneca srl
www.seneca.it
ENGLISH 1/8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-MODEM-3G and is the answer not in the manual?

Questions and answers

Summary of Contents for Seneca Z-MODEM-3G

  • Page 1: Installation Manual

    Product information: commerciale@seneca.it This document is the property of SENECA srl. Unauthorized duplication and reproduction is strictly forbidden. The content of this document corresponds to the described products and technologies. Stated data may be modified or supplemented for technical and/or sales purposes.
  • Page 2: General Specifications

    The full content of this manual must be read before performing any operation. The module must only be used by qualified electricians. Specific documentation is available from www.seneca.it/products/z-modem-3g The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to electrostatic discharges. Take appropriate measures during any operation.
  • Page 3 4. TECHNICAL SPECIFICTIONS Power Supply 11 − 40 V or 19 − 28 V 50/60Hz Power supply Absorption 4.5 W max Connections 0.2 – 2.5 mm screw removable terminals (AWG 24-12) Modem Frequencies GSM / GPRS / EDGE Quad-band: GSM850 GSM 900, DCS 1800, PCS 1900 UMTS / HSPA+ Dual-Band: WCDMA2100/900 2100/850, 1900/850 Transmitted power...
  • Page 4 Environmental Conditions Protection rating IP20 Operating temperature -20 − +60 °C -40 − +85 °C Storage temperature Humidity 10 – 90% non condensing Altitude up to 2000 m above sea level Case Weight Dimensions 41 x 44 x 26 mm (terminal excluded) Case PA6, black Standards...
  • Page 5 1) Move the four hooks on the back of the module outwards as illustrated in fig. 1b. 2) Insert the module aligning the IDC10 rear connector to the female of the Seneca support for the IEC EN 60715 guide. 3) To secure the module to the guide, tighten the four hooks on the side of the IDC10 rear connector as shown in fig.
  • Page 6 Micro USB The module has a microUSB connector, you can connect the Z-MODEM-3G to Z-TWS4 or to Z-PASS1 through it. The adaptor cables, supplied with the module, must be connected as shown in the figure.
  • Page 7 Antennas One antenna (ANTENNA-STILO-EA247) is supplied with Z-MODEM-3G. This antenna must be screwed into the SMA MAIN connector. second "diversity" antenna connected to the module in order to improve the performance of the modem. For more performance you can use an antenna with a better gain (see accessories).
  • Page 8 9. MODULE LAYOUT 100 mm 17.5 mm 1112 M AIN STAT Z-M ODEM -3G DECOMMISSIONING AND DISPOSAL Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling). The symbol on the product or packaging indicates that the product cannot be discarded as domestic waste.

Table of Contents