Usb-Blaster Plug Connection; Figure 2-2: Usb-Blaster Dimension; Figure 2-3: Usb-Blaster 10-Pin Female Plug Dimensions - Altera USB-Blaster User Manual

Chapter 2: USB-Blaster Specifications
USB-Blaster Connections

USB-Blaster Plug Connection

The 10-pin female plug connects to a 10-pin male header on the circuit board
containing the target device.
Figure 2–3
Figure 2–2. USB-Blaster Dimension
Note to
(1) For Rev. B and Rev. C.
Figure 2–3. USB-Blaster 10-Pin Female Plug Dimensions
Table 2–2
programming mode.
© April 2009 Altera Corporation
Figure 2–2
shows the dimension of the female plug.
2.5
1.0
2.0
Dimensions are shown in inches.
Figure 2–2:
0.425 Typ.
10
0.250 Typ.
9
Dimensions are shown in inches. Spacing between pin centers is 0.1 inches.
identifies the 10-pin female plug pin names and the corresponding
shows the dimensions of the USB-Blaster, and
7.5 (1)
8 6 4 2
7 5 3 1
0.100 Sq.
0.025 Sq.
0.700 Typ.
0.5 (1)
USB-Blaster Download Cable User Guide
2–3