RapidSignage RS-410 Quick Installation Manual page 2

RS-410 Configuration
Direct Connect:
1. Connect the provided power adapter into the AC in
2. Connect Ethernet cable to the computer and to LAN port
3. Connect
Mini DP
4. Configure your computer system's network settings to:
a. IP address (TCP/IPv4): 192.168.100.2
b. Subnet mask: 255.255.255.0
5. Open your browser (Google Chrome is recommended) and connect to the RS-410:
c. Default URL:
d. Default login: admin
e. Default password: admin
RapidSignage - Rapid Digital Signage Deployments
www.rapidsignage.com
cable to port (3)
Mini DP
http://192.168.100.1
(13)
(6).
to an Videowall.