Connect To Network - Uniden U-Bell Quick Start Manual

Connect to Network

1. Remove the cover of the
doorbell by pulling both
sides and pressing the
button to release it.
NOTE
The QR code on the
product label.
2. On the device manager
page, click "Home" in the
footer of the app, then
click "Add Device".
At this point in the
setup, the doorbell
NOTE
button should be
alternating flashing red
& blue.
3. Scan the QR code with
the mobile app.
4. The app should show
"The device is o ine".
5. Click the button that says
"Connect to a Network".
IMPORTANT
DO NOT CLICK
NEXT YET!
7