Appearance - Uniden U-Bell Quick Start Manual

Appearance

Mic
IR Light
Lens
Button Backlight
Backlit Call Button
Name Description
IR Light
Auto light source for night vision. The lights are behind the panel.
Button Solid blue: The doorbell is starting up and running properly.
Backlight Cycling blue and red: WiFi is not connected.
Flashing red: The doorbell is upgrading.
Flashing blue: The doorbell is calling the App.
No backlight: The doorbell is speaking with the App.
Screw 1 & 2 These 2 screws are used to connect the power cables.
Memory Card Slot
Name Description
Memory
Use this slot for a memory card, video les will be stored on the memory card.
Card Slot
RESET If the doorbell has not been activated, hold the button for 5
Button seconds to enter the WiFi connection mode. The call backlight
cycles blue and red.
NOTE
If the doorbell has been activated, hold the button for 15 seconds to
restore the factory settings.
Loudspeaker
If you do not operate the device within 3 minutes the doorbell will exit the
WiFi configuration automatically.
Screw 1
Screw 2
RESET Button
4