Table of Contents
Advertisement
1.1 How to insert SIM card (not include in package)
Figure 1: Lift the battery cover, start for it at the recess the top left corner of the phone.
Figure 2: The location for the SIM card is in the top left corner, inserts the card with the gold chip face
down.
Figure 1
Caution:
1．Keep the SIM card out of reach of children.
2．Do not touch the portion that has the chips.
3．Keep the SIM card away from magnets.
4．Avoid putting the SIM card under direct heat such as sunshine.
1.2 How to insert MicroSD card (optional)
Figure 3: Push the card holder switch to the top, place the card into the cardholder, close the cardholder
and pull the switch down
Page 3.
1.3 How to insert battery
Warning：Do not remove battery when the power is on or when the phone is connected to the charger.
Fail to comply this rule may result in damaging the cell phone and the SIM card.
Figure 4: Place the battery so the golden contact matches with phone.
Figure 5: Press the battery cover until it clicks. Start at the top of the phone, to the center.
Figure 4
Caution：
1．Before using the phone for the first time, please charge the battery for at least four hours. If you violate
this charging time, the battery life may decrease.
2．During the charging process, do not remove the battery. Fail to comply may damage the mobile.
3．It is normal if the phone or the charger is warm during charging.
4．If the battery capacity is exhausted, it takes a few minutes in the charging process before the charging
icon displays on the LCD.
If a part is missing or defective, please contact Jethro hotline at the number
1-888-509-6199
1. SETTING UP THE CELL PHONE
Figure 2
Figure 3
Figure 5
or email Jethro@jethroshop.com for any assistance
Advertisement
Table of Contents
