Troubleshooting - AAB ABM-200 User Manual

Troubleshooting

PROBLEM
ABM-200 not found
Incorrect air speed reading
Slow temperature/humidity
response
Incorrect
temperature/humidity reading
Fan popped out
Screw port doesn't work
POSSIBLE CAUSE
Low/dead battery
Bluetooth off
Pairing not performed
through app
Low battery
Incorrect AK %
Meter not
perpendicular to airflow
Obstruction in front of
meter
Low air flow
Ports blocked
Low Battery
Meter acclimating
Ports blocked
Direct sunlight
Impact to fan area
Wrong thread size/type
CORRECTION
Replace battery
Turn on phone's Bluetooth
Un-pair in OS and pair
through app
Replace battery
Correct AK adjust
percentage
Adjust fan directly into
airflow
Remove obstruction
Move meter to side
obstruction
Move into air stream
Remove obstruction from
front and/or rear ports
Replace battery
Give meter time to adjust to
current conditions
Remove obstruction from
front and/or rear ports
Move from direct sunlight
Align notch and groove on
circumference. Press back
in.
Ensure accessory has a
¼-20 threaded screw
10