What To Expect; Watching Tv; Changing Channels - RCA L26WD21 User Manual

Channel
Go Back
Channel List
Auto Channel Search
List and Labels
<OK>: Enter Sub-menu
List and Labels
Go Back
Channel Number
In Channel List
Channel Label
Favorite Channel
<OK>: Start CH Select <R/L>: Select CH Num
<INPUT>: Select Signal Source <OK>: End Select
Look for the A at the top of the screen to
see if you're watching analog channel.
D 10-1 CBS
Sub channel
Primary channel
Look for the D at the top of the screen to
see if you're watching digital channel.
Chapter 1
You might find there are still some channels in your list that are
unavailable to view. To get rid of these channels, press MENU and
choose Channel. Highlight and select List and Labels, select In Channel
...
...
List and press OK to remove the check mark in the box. The channel
...
will no longer be visible in the channel list. Note that removing channels
from your channel list may be time consuming, so you might want to do
it later. More details pls. go to page 25.
17.1arch ...

What To Expect

Watching TV

•
•

Changing Channels

•
•
Connections and Setup
Remember: Look for an A at the top of the screen to see if you're
watching an analog channel.
Analog video is sent in a 4/3 format, your TV can display these
channels in a 16/9 format by pressing the ZOOM+/- buttons to view
the different formats available: Normal, Stretch, Center or Zoom.
Remember: Look for a D at the top of the screen to see if you're
watching a digital channel.
Most digital video is sent in a 16/9 format which does fill your
screen, but sometimes is sent in 4/3 which does not fill your
screen. It depends on how the station or source device is
formatting the video. If there are bars on-screen, press the
ZOOM+/- button to try a different format that may eliminate
the bars. Some bars can't be removed because of the way
the format is sent by the broadcaster.
Digital channels can have both primary channels (like the analog
channel number) and sub-channels. To tune to a digital channel
with a sub-channel, such as 10-1 as shown in the graphic to the
left, enter the primary channel number (10), then press either the
right arrow or the SUB CH button. Enter the sub-channel number
(1) and press OK.
Depending upon the type of signals you have connected to your
HDTV, you might notice that the channels change slower than
you're used to. This is perfectly normal. Digital cable channels
sometimes take longer to tune.
15