Panasonic DMR-EH57EC Service Manual page 20

DMR-EH57EC / DMR-EH57EP / DMR-EH57EE / DMR-EH575EG
Mode name
Progressive initialization The progressive setting is initialized to
7.1.3. Service Modes at a glance
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneously for five seconds.
Mode name
Release Items
Error Code Display
ROM Version Display
White Picture Output
Magenta Picture Output Magenta picture is output with Component
Item
Description
Interlace.
Item
Description
Item of Service Mode executing is cancelled.
Last Error Code of U/H/F held by Timer is
displayed on FL.
*Details are described in "7.1.1.
Diagnosis Functions".
1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
FL display
The display before
leaves.
FL display
Self-
If any error history does not exist,
[F00] is displayed.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
20
Key operation
Front Key
execution When the power is on (E-E mode),
press [STOP]
simultaneously for 5 seconds.
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
and [PLAY]