Advertisement
Owner's Guide and Installation Manual
Shown with 5DS34XX
(Fan not included)
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
MCDF series
RETAILER NAME:
RETAILER ADDRESS:
Install the fan adapter only with
4MC20, 3TF24, 4CO28 or 5DS34
series.
2.72 kgs
5.98 lbs
Fan adapter weight
Advertisement
Table of Contents
Related Manuals for Monte Carlo Fan Company MCDF series
Summary of Contents for Monte Carlo Fan Company MCDF series
- Page 1 Shown with 5DS34XX (Fan not included) Install the fan adapter only with 4MC20, 3TF24, 4CO28 or 5DS34 series. MCDF series Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Cutomer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 3/8/2012...
- Page 3 Slip coupling onto the yoke of fan. Aligning the holes on coupling and yoke and then reinstall the bolt, nut and set screw removed in step 5. Note: Install bolt from the side with mark (arrow). © 2011 Monte Carlo Fan Company 3/8/2012...
- Page 4 Warning: Do not connect different finishes of wires together. Wrong wire connection may result in electric shock hazard or serious personal injury. Note: Refer to instruction manual of light kit for light kit installation. © 2011 Monte Carlo Fan Company 3/8/2012...
- Page 5 Note: This fan adapter is not available Attach canopy bottom cap onto canopy with Remote controller. by aligning its notches with the preassembled canopy mounting screws on mounting bracket and twist clockwise until tight. © 2011 Monte Carlo Fan Company 3/8/2012...
- Page 6 Place hanger ball on long downrod with pin through downrod and seat in the slot in hanger ball. Tighten the set screw to hold downrod with hanger ball securely. Warning: Pin must be installed in slot and through downrod © 2011 Monte Carlo Fan Company 3/8/2012...
- Page 7 Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2011 Monte Carlo Fan Company 3/8/2012...
- Page 8 Mar.2012...
Need help?
Do you have a question about the MCDF series and is the answer not in the manual?
Questions and answers