Cisco 800 series Configuring page 9

Cisco ios software configuration
Hide thumbs Also See for 800 series:
Table of Contents

Advertisement

Configuring Radio Settings on an Access Point
5.
6.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface dot11Radio interface
Example:
Router(config)# interface dot11Radio 0/3/0
Step 4
channel {number | MHz | least-congested}
Example:
Router(config-if)# channel 2457
Step 5
end
Example:
Router(config-if)# end
Step 6
copy running-config startup-config
Example:
Router# copy running-config startup-config
end
copy running-config startup-config
How to Configure Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
Enters global configuration mode.
Enters radio interface configuration mode.
The interface argument is in module/slot/port format,
except for the Cisco 800 series and Cisco 1800 series
fixed-configuration routers, where the interface
argument is either 0 or 1.
The 2.4-GHz radio is port 0, and the 5-GHz radio is
port 1.
(Optional) Sets the default channel for the AP radio.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

1800 series2800 seriesSeries 3800

Table of Contents