Language Setting; Installing The Firmware For Your Recorder Or For Your Communication; Board; Pc - Recorder Interface - Honeywell DPR180 Product Manual

5.2.3 Language setting

To change the language used by PC Configurator:
1. Click on Start, Programs, DPR 180_250 PC Configurator, Language Preferences & Readme .
The following dialog is launched.
2. Select the required language.
3. Click on save
4. Execute the application to see the change in language.
5.3 INSTALLING THE FIRMWARE FOR YOUR RECORDER OR FOR YOUR
COMMUNICATION BOARD
The following procedure allows you to install new Firmware versions on your PC (the Firmware for your
recorder or the Firmware for your communication board).
• Insert the Firmware CD.
• Double-click on "Upgrade Firmware Setup" icon.
• Follow the instructions.
5.4

PC - RECORDER INTERFACE

5.4.1 Connections

To communicate with your recorder, you need the PC Interface Kit 46190409-501, which includes the
application software for your recorder configuration. This kit is composed of:
• one PC interface box. Plug it directly into the PC serial port.
5-4
5. PC CONFIGURATION