Dmx Mode - MBT LEDMOONDOG User Manual

DMX mode introduction
Setting DMX mode
Notes: X means no matter dipswitch1~9 is ON or OFF, dipswitches will not function.
Calculate DMX address
FOR EXAMPLE: if switch #2 and switch#3 is on and the left are off, DMX address is 6.
(0+0+0+0+0+0+4+2+0 = 6)
Switch #9 =0; Switch #8 = 0; Switch #7 = 0; Switch #6 = 0; Switch #5 =0;Switch #4 =
0;Switch #3 = 4;Switch #2 = 2; Switch #1 = 0.
Notes: 1. DMX address can be set by switches1~9.
2. when switch10 is ON, it is DMX mode, otherwise it is MASTER /SLAVE mode.
3. When switch is ON, its value is the correspondent data on the top.
DMX function
When DMX signal exists, blue LED will flash.
Each fixture occupies 9 DMX channels.
DMX 512 signal can control multi fixtures ' different movements at the same time.
Different DMX address of each fixture will lead to different movements.
However, DMX address should be set first.
5