Download Print this page
   

Advertisement

Easy Pairing
- With the power off, slide the power switch
to the ON position.
- When the headset enters pairing mode, the
LED indicator will show a solid blue light.
(Speech: Ready to pair)
- Using your phone, find the
and search for new devices.
- Select LG HBS800 from the list of devices
and pair it with your phone.
- If you are asked for the Password/PIN code during the pairing
procedure, please enter 0000 (4 Zeros).
- Once pairing has completed successfully, you will hear a beep. (Speech:
Your headset paired)
- After pairing successfully, be sure to "Connect" to the LG HBS-800.
(Speech: Connected)
- Some phones will ask for permission to access the phones contact list.
If you would like to use Name Alert Function, please select OK or Allow
Access.
Advanced Multipoint
The HBS-800 is capable of having two devices connected to the headset at the same time.
This will give you the freedom of using call waiting between calls on both of your connected
phones.
Connection
- Pair the headset with one of your Bluetooth -enabled phones.
- Turn the headset off.
- With the power off, press the CALL button and slide the power switch to the ON position
at the same time for 2 seconds to enter Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth -enabled phone. (This will be your
primary phone).
- Once this phone is paired and connected, go back and connect the originally paired phone
to the headset. This will now be your secondary phone.
Note: When the HBS-800 is connected to two phones at the same time(Multipoint), the
phone calling functions will work with the primary phone.
Note: In case of failure to connect to the primary phone through Easy Pairing, the HBS-800
will enter pairing mode.
Calling function
- Voice Dialing and Last Number Redial features work with the primary phone (or handset
which made the last outgoing call).
Call waiting
- While speaking on an active call, press and hold the CALL button for 1 second to switch
to an incoming call.
- To switch between 2 active calls, press and hold the CALL button for 1 second.
- To end both calls briefly press the CALL button.
- If both phones are receiving an incoming call, the headset will default to the primary device.
Parts Description
Memory Flex Neck Strap
ANC Switch
REWIND Button
FAST FORWARD Button
PLAY / PAUSE / STOP Button
Earbud (R)
Calling
Answer a Call
- When there is an incoming call, the headset will ring and vibrate. Briefly
press the VOLUME DOWN button to stop vibration. Briefly press the
CALL button to answer the incoming call.
Make a Call (Last Number Redial)
- Press and hold the CALL button for one second.
Make a Call (Voice Dial)
- Briefly press the CALL button to activate your handset's voice command menu.
End a Call
- Briefly press the CALL button.
Call Waiting
- Press and hold the CALL button for one second.
Call Reject
- Press and hold the CALL button for one second when the headset rings.
(Speech: Call Rejected)
Mic Mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons at the
same time for 1 second to mute/unmute the Mic during conversation.
HBS-800
QUICK START
GUIDE
Menu
Charging Port
LED Indicator
Power Switch
Rev 3.0 US
Microphone
VOLUME UP Button
VOLUME DOWN Button
CALL Button
Earbud (L)

Advertisement

   Also See for LG HBS-800

   Related Manuals for LG HBS-800

   Summary of Contents for LG HBS-800

  • Page 1

    If you would like to use Name Alert Function, please select OK or Allow Access. Advanced Multipoint The HBS-800 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones.

  • Page 2

    Noise Cancelling feature. You will hear “ANC off”. d) The Ambient Noise Cancelling feature is also available when the HBS-800 is set to OFF. The solid violet light will be displayed but the voice prompt will not be played to indicate on and off.

Comments to this Manuals

Symbols: 0
Latest comments: