Advertisement
B. CONNECTING TO A DISPLAY (Using a
• When using HDMI cable, set the HDMI Audio
HDMI cable)
to PCM.
• Press the HDMI button on the remote control
For TVs that support it, HDMI can provide the
to change output signals as below:
best quality audio and video output (depending
480p (progressive)
on media source), and so is the preferred
720p (progressive)
connection type. The HDMI cable incorporates
1080I (interlace)
both audio and video signals, so you will have
1080p (progressive)
just one cable running from the unit to your TV.
Notes:
Using the HDMI cable (not included), connect
• Refer to your owner's manual to the connected
the HDMI OUT jack on your unit to the HDMI IN
TV as well.
jack on your TV or HDMI-compatible display.
• When you connect the DVD player to your TV,
be sure to turn off the power and unplug both
units from the wall outlet before making any
connections.
• If you have a HDMI (with HDCP) equipped
monitor or display, you can connect it to this
• When using the HDMI cable, do not connect
player using a HDMI cable.
to other analog video outputs.
HDMI, the HDMI logo and High-Definition Multimedia
• Set an output signal from the HDMI terminal
Interface are trademarks or registered trademarks of
of the DVD player in accordance with your
HDMI licensing LLC.
TV's input signal
CONNECTING TO OPTIONAL EQUIPMENT (AMPLIFIER)
A. ANALOGUE CONNECTION
B. DIGITAL CONNECTION
Using an audio/video cable, connect the left/right
Using a coaxial digital audio cable (not included),
AUDIO OUT jack on your unit to the AUDIO IN
connect the DIGITAL COAXIAL OUT jack on
jack on your other source.
your unit to the DIGITAL AUDIO IN jack on your
other source.
ANALOGUE CONNECTION
DIGITAL CONNECTION
Amplifier of
Audio equipment with
stereo system, etc.
digital audio input jack
AUDIO IN
DIGITAL
AUDIO IN
Audio cable
(red and white)
Coaxial Digital
Audio cable
DRC279RE
DRC279RE
Notes:
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
• If the external equipment is television and this audio system is close to it, you may experience the
interference if the tuner function is selected while the television is working.
• Refer to the instruction manual of the connected equipment as well.
PLAYING A DISC
This user manual explains the basic instructions
instructions accompanying the specific DVD in
for operating this unit. Some DVDs are produced
question for more information about the options
in a manner that allows specific or limited
available on that DVD.
operation during playback. Therefore, this unit
may appear on the screen during operation.
may not respond to all operating commands.
It means that the desired operation is not
THIS IS NOT A DEFECT. Please refer to the
permitted by the unit or disc.
Playing a Disc
• To
return
to
normal
the
ZOOM
button
1. Press the STANDBY / ON button to turn on
the unit.
1
2
3
screen will return to normal.
See
CUSTOMIZING
THE
FUNCTION
• When you reach the edge of the image, the
SETTINGS before proceeding to step 2.
display will not shift anymore in that direction.
2. Press the
OPEN/CLOSE button to open
the disc tray.
3. Place a disc onto the disc tray with the label
Skipping (Forward / Reverse)
side up.
• Press the
PREV button to go back to
4. Press the
OPEN/CLOSE button to close
current or previous chapters/tracks.
the disc tray. It takes a short while for your unit
• Press the
NEXT button to advance
to load the disc. After loading, for most DVDs,
chapters/tracks.
the unit will automatically take you main menu
• For audio CDs, use the number buttons on
or start playing.
the remote control to jump immediately to the
5. If the unit does not automatically start playing
desired track number.
the DVD, press the
PLAY button.
Fast Forward / Fast Reverse
Pausing Playback (Still Mode)
1. Press the SEARCH
or SEARCH
Press the
PAUSE button on the remote. To
button when a disc is playing. Each time you
resume normal playback, press the
PLAY
press the SEARCH
or
button.
button, the playback speed changes in the
Each time you press the
PAUSE button, the
following sequence:
picture advances one frame.
Stopping Playback
• Press the
STOP button at the location
where you want to interrupt playback. To
resume playback at the position where
the disc was stopped, press the
PLAY
2. Press the
PLAY button when you reach
button.
the desired point to resume normal playback.
• If you press the
STOP button twice, the
Notes:
unit's memory will be cleared and pressing
• The unit mutes sound and subtitles during
the
PLAY button will reset the disc to the
reverse and forward scan of DVDs.
beginning.
• The fast playback speed may differ depending
on the disc.
Zooming into an image
While a disc is playing, press the ZOOM button
to enlarge the image in several levels.
• While an image is zoomed, you can use the
,
,
or
CURSOR button to shift the
view and display the part you want.
- 5 -
DRC279RE ENG IB.indd 1
Slow-motion Play
• Some DVDs allow you to change subtitles
1. Press the SLOW button on the remote in play
only via the disc menu. If this is the case,
mode.
press the MENU button and choose the
• Each time the SLOW button is pressed, the
appropriate subtitle on the disc menu.
speed of slow-motion playback changes in
the following sequence:
Angle Selection
Some DVDs contain scenes which have been
1/2
1/4
1/6
1/8
shot from a number of different angles. For these
discs, the same scene can be viewed from each
2. Press the
PLAY button to return to normal
of these different angles.
playback speed.
1. While you are playing a DVD with different
angles recorded, press the ANGLE button to
Audio Selection
view the number of current angles available.
On some DVDs, the sound is recorded in two
2. Press the ANGLE button repeatedly to
or more formats. Follow the directions below
change the scene to the next recorded angle.
to select the preferred language and sound
e.g.
system.
1. While a disc is playing, press the AUDIO
button to show the current audio format
number. e.g.
2. Press the AUDIO button repeatedly to select
the desired audio format.
Notes:
• After approx. two seconds, playback will
• If only one audio format is recorded on the
continue from the new angle you selected.
DVD, the number does not change.
• If no button is pressed within 10 seconds,
• Some DVDs allow you to change audio
playback continues without changing the
selections only via the disc menu. If this is the
current angle.
case, press the MENU button and choose the
Notes:
appropriate language on the disc menu.
• This function can only be used for discs on
• You can select different audio channels
which scenes shot from multiple angles have
(Stereo, Left or Right) on an Audio CD by
been recorded.
pressing the AUDIO button repeatedly.
• If only one angle is recorded,
displayed.
Subtitle Selection
1. While
a
DVD
is
playing,
press
the
Display Function
SUBTITLE
button
to
display
the
While the disc is playing, press the DISPLAY
current language setting, as shown in
button on the remote control repeatedly to
the example.
display information on operation status.
Elapsed Time: Elapsed time from the beginning
of the chapter/title which is currently playing.
2. Press the SUBTITLE button repeatedly to
select the desired subtitle language. You can
Remaining Time: Remaining time of the
turn subtitles off by pressing the SUBTITLE
chapter/title which is currently playing.
button repeatedly until the
is
displayed.
e.g.
Notes:
• Some DVDs are set to display subtitles
automatically, and you cannot turn them off
even if you set the subtitle function to off.
• During some scenes, the subtitles may not
appear immediately after you select your
desired scene.
• The number of subtitle languages recorded
differs depending on the disc. If only one
language is recorded, the language does not
change.
• This function can only be used for discs
on which subtitles have been recorded in
multiple languages.
view,
press
until
the
LoCATING A DESIRED SECTIoN
shows. The
Off
Locating a specific chapter / track / title / time
If you know the chapter / track / title / time number you want to
play, you can locate a specific chapter / track / title / time by directly
selecting a chapter / track / title / time number.
1. Press the GOTO button to search your desired chapter / track /
title / time.
2. Press
or
button to highlight a chapter / track / title / time and
press the corresponding number button(s) for the chapter / track /
title / time you want.
3. Press the OK button to confirm. The unit will start playback about
3 seconds later.
Notes :
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD
disc.
SEARCH
PLAYING PICTURE FILE DISC
This unit can play picture files recorded on CD-R and CD-RW discs.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with label side up.
3. Close the disc door.
4. The unit will load the disc and automatically display the
contents of the disc on the screen, while playing the beginning
of the first picture file. These files will then be played back one
by one. If the unit does not automatically start playing, press
the
PLAY button.
5. Press
or
button to select a picture file to view.
6. Press the
,
,
or
CURSOR button to view and select
the files that you want to view, then press the OK button to confirm the selected file.
NOTE:
• You can press the
PAUSE button to interrupt playback, and press the
playback.
• During playback, press the
/
button repeatedly to rotate the picture. Press
anti-clockwise by 90°. Press
to rotate picture clockwise by 90°.
- 6 -
REPEAT PLAYbACK
You can play a specific title or chapter repeatedly.
(Title repeat, chapter repeat, A-B repeat)
Repeating a chapter
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT
DISC button until the
indicator displays on the screen. The current
chapter is played repeatedly.
Repeating a title
You can play the same title repeatedly.
2. While
the
disc
is
playing,
press
the
REPEAT
DISC
button
until
the
indicator displays on the screen.
The current title is played repeatedly.
To resume normal playback
3. While
the
disc
is
playing,
press
REPEAT
DISC
the
button
until
the
indicator displays on the screen.
You can play a single track and whole disc
repeatedly.
Repeating a single track
You can play the same track repeatedly.
1. While
the
disc
is
playing,
press
the
REPEAT
DISC
button
until
the
indicator displays on the
screen. The current track is played repeatedly.
Repeating a whole disc
2. While
the
disc
is
playing,
press
is
the
REPEAT
DISC
button
until
the
indicator displays on the screen.
The whole disc is played repeatedly.
PRoGRAmmAbLE mEmoRY
Playing Titles/Chapters in a Favorite Order
You can combine your favorite titles/chapters and play them in the order you determine.
1. When a DVD is stopped, press the MEMORY button and the following display appears.
2. Select the items in the order you want by pressing the number buttons.Each time you press the
Cursor buttons ( ,
,
,
), the space is highlighted. Highlight where you want to enter, then
press the corresponding number buttons.
3. Press the Cursor buttons ( ,
,
,
) to move the highlighted
Elapsed time
bar to "Play", then press the OK button. The DVD player starts
memory playback.
Remaining time
4. To resume normal playback from memory playback
a) Press the MEMORY button in stop mode.
b) Press the Cursor buttons ( ,
,
,
) to move the highlighted
bar to "Clear All", then press the OK button. All the input programs
will be cleared.
c) Press the
PLAY button to resume normal playback.
Note:
• If the title or chapter numbers you entered is not permitted by the DVD, after you press the OK
button, it will restore to - - -. You should re-enter correct numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory
playback.
• If you press the MEMORY button while the display appears on the TV screen, the display
disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD
player.
PLAY moDES FoR CD oR JPG DISC
Search
When playing CD / JPG discs, you can modify the Play Modes through the Toolkit which appears on
Title
1
the picture on the screen. Press the
/
button to navigate between the windows and the
Chapter
- - -
button to select files/tracks or play mode items. Then press the ENTER button.
Time
00. 00. 00
1. Press the Cursor buttons ( ,
, , ) to select "Edit mode" then press the ENTER button.
2. Use the Cursor buttons ( ,
,
,
) to select tracks/files shown on the left hand side of the
window. Press the ENTER button to confirm the selected tracks/files. "
selected tracks/files.
Search
3. Select "Add to program", then press the ENTER button. "
Track
2
means that the tracks/files you have selected are added into the "Program view".
Time
00. 00. 00
4. Select "Program view" to view programmed files. To add more files by "Browser view" follow the
Disc Time
-- : -- : --
steps.
5. Press the
PLAY button to start the program playback.
The Toolkit has the following play mode items:
• Repeat ( Off / Track / All ):
Off: Resumes normal playback.
Track: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode ( Normal / Shuffle / Music intro ):
Normal: Resumes normal playback.
Shuffle: Plays back tracks/files in random order.
Music intro (for Audio CD only): Only plays back the first 10
Filter
seconds of all the tracks on the current folder/disc.
Repeat
: Off
• Edit mode: Program operation works only when "Edit mode" is selected.
Mode
: Normal
• Program view: To view tracks/files in the "Program view" list. It is disabled when the "Program view"
list is empty.
• Add to program: Add files/tracks to the "Program view" list. It is disabled if the "Edit mode" is not
selected.
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the "Program view" list.
Select a file/track or more you want to delete in complete stop mode (press the
Use the Cursor buttons ( ,
,
,
) to select tracks/files you want to delete, a "
PLAY button to resume
beside the deleted file/track. Select "Clear program" and then press the ENTER button. It is disabled
if the "Edit mode" is not selected.
to rotate picture
Note: The program will be deleted if the disc door is opened, or selected files are deleted by selecting
"Clear program".
CUSTomIZING THE FUNCTIoN SETTINGS
To resume normal playback
Language
3. Press the REPEAT DISC button until the
indicator displays on the screen.
You can play a specific section repeatedly.
Repeating a specific section
1. While the disc is playing, press the REPEAT
A-B button at the beginning of the section (
is displayed) you want to play
repeatedly.
2. Press the REPEAT A-B button again at the
Language
end of the section (
is displayed).
1. Press the SETUP button.
3. The unit will immediately begin replaying your
2. Press the
button to select Language.
selection.
3. Press the OK button, then the
To resume normal playback
shift and change the Language.
4. Press the OK button.
4. While the disc is playing, press the REPEAT
5. Press the SETUP button to exit the menu.
A-B button until the
indicator
Subtitle
displays on the screen.
1. Press the SETUP button.
Notes:
2. Press the
button, then the
• Some discs may not permit A-B repeat
select Subtitle.
operation.
3. Press the OK button, then the
• A-B repeat can only be used within the same
shift and change the Language.
title. If the start and end of the section to be
4. Press the OK button.
repeated are in different titles, A-B repeat is
5. Press the SETUP button to exit the menu.
cancelled.
Note:
• You can specify a segment only within the
• Some DVDs may be set to display subtitles in
current title or track.
a different language other than the ones you
• The A-B repeat function does not operate in
selected. A prior subtitle language may be
scenes where different camera angles are
programmed on the disc.
recorded.
• Some DVDs allow you to change subtitle
selections using the disc menu only. If this is
the case, press the MENU button and choose
the appropriate subtitle language from the
selection on the disc menu.
Audio
1. Press the SETUP button.
2. Press the
button, then the
select Audio.
3. Press the OK button, then the
until your preferred Audio is displayed.
4. Press the OK button.
5. Press the SETUP button to exit the menu.
Note:
• Some DVDs may not be played in the
language you selected. A prior language may
be programmed on the disc.
DVD Menu
1. Press the SETUP button.
2. Press the
button, then the
Chapter
select DVD Menu.
number
Title number
3. Press the OK button, then the
until your preferred DVD Menu language is
displayed.
4. Press the OK button.
5. Press the SETUP button to exit the menu.
Note:
• Some DVDs may not include your pre-selected
language. In this case, the DVD player
automatically displays disc menus consistent
with the disc's initial language setting.
Video
/
Aspect Ratio
" will appear in front of the
1. Press the SETUP button.
2. Press the
/
button to select Video.
" will disappear from the screen. It
3. Press the
button, then the
select Aspect Ratio.
4. Press the OK button, then the
shift and change the aspect ratio.
5. Press the OK button.
6. Press the SETUP button to exit the menu.
Note:
• The displayable picture size is preset on the
DVD. Therefore, the playback picture of some
DVDs may not conform to the picture size you
select.
• When you play DVDs recorded in the 4:3
picture size only, the playback picture always
appears in the 4:3 picture size regardless of
the Aspect Ratio setting.
• Select 16:9 to conform to the LCD screen on
the unit. Always be sure that your Aspect Ratio
conforms to the actual TV in use if you connect
the unit to a TV.
View Mode
1. Press the SETUP button.
2. Press the
/
button to select Video.
3. Press the
button, then the
STOP button twice).
select View Mode.
" will appear
4. Press the OK button, then the
shift and change the View Mode.
5. Press the OK button.
6. Press the SETUP button to exit the menu.
- 7 -
Fill:
Fill the screen with decoded image.
Original:
Display image as it original size.
"Original" is preferred for Jpeg
viewing.
Height Fit: Fit the screen height with image
height.
Width Fit:
Fit the screen width with image width.
Auto Fit:
Automatically fit the decoded image
on screen without distortion.
Pan Scan: Automatically display decoded image
on full screen without distortion.
Note: Depending on the DVD, you may not be able
to view the mode as selected.
HDMI Resolution
/
button to
1. Press the SETUP button.
2. Press the
/
button to select Video.
3. Press the
button, then the
/
button to
select HDMI Resolution.
4. Press the OK button, then the
/
button to
select the options (Auto, 480p, 720p, 1080i or
/
button to
1080p).
5. Press the OK button.
/
button to
6. Press the SETUP button to exit the menu.
Note:
Select the HDMI resolution according to the
performance of the connected TV.
JPEG Interval
1. Press the SETUP button.
2. Press the
/
button to select Video.
3. Press the
button, then the
/
button to
select JPEG Interval.
4. Press the OK button, then the
/
button to
shift and change JPEG interval.
5. Press the OK button.
6. Press the SETUP button to exit the menu.
Off:
Plays back one file at a time.
5 seconds
Plays back images in the form of a
slide show at 5 seconds interval.
/
button to
10 seconds Plays back images in the form of a
slide show at 10 seconds interval.
/
button
15 seconds Plays back images in the form of a
slide show at 15 seconds interval.
Audio
/
button to
/
button
Digital Output
1. Press the SETUP button.
2. Press the
/
button to select Audio.
3. Press the
button, then press the
/
button to select Digital Output.
4. Press the OK button, then press the
/
button to select the output sound format (Off,
PCM or Raw).
5. Press the OK button.
6. Press the SETUP button to exit the menu.
PCM:
Select when connected to a Multi-channel
digital stereo amplifier.
Raw:
Disc audio raw data will be output.
Off:
To disable Digital Output.
Note: If you connected to a TV using HDMI, make
sure to select "PCM".
Night Mode
1. Press the SETUP button.
2. Press the
/
button to select Audio.
3. Press the
button, then press the
/
button to select Night Mode.
4. Press the OK button, then press the
/
button to change the On/Off mode.
/
button to
5. Press the OK button.
6. Press the SETUP button to exit the menu.
/
button to
Note: Night mode is Dynamic Range Control
(DRC) option for analog audio output.
Misc
Use Default Settings
1. Press the SETUP button.
2. Press the
/
button to select Misc.
3. Press the
button, then select "Use Default
Settings" dialogue box and press OK button.
4. Press the
/
button to select "Yes". Press
/
button to
the OK button and the original setting will be
restored. The unit will exit the default setting
menu automatically and re-load the disc in the
/
button to
disc tray.
Note: It will take 3-5 seconds to reset the DVD
player to the factory default.
- 8 -
4/9/2009 10:30:47
Advertisement
