Page 1
MELAG, a medium-sized family run company has specialized in the area of practice hygiene since 1951. During this time, we advanced to become one of the leading manufacturers of sterilizers. World sales of more than 450,000 MELAG devices gives testimony to the quality of our devices, which are manufactured exclusively in Germany.
Page 2
General notes Please read this operating manual carefully before commissioning the device. The instructions include important safety information. The functionality and value-retention of this autoclave depends on the care accorded to it. Please store this operating manual carefully and in close proximity to the device. It represents a component of the product.
Chapter 1 – Device description Chapter 1 – Device description Intended Use The MELAdest 65 water distiller produces distilled water. Functional principle This practical water distillator produces water of the highest quality in accordance with what represents one of the oldest methods of water treatment. When the device is activated, the water temperature increases and escaping gases are boiled, then led through an opening.
Chapter 2 – Commissioning Chapter 2 – Commissioning Fitting the glass flask Remove all the individual parts from the glass flask carefully. Remove the packaging from the individual parts. Place the glass flask in the plastic guard ring. Loosen a screw on the metal collar on the neck of the glass flask. Place the collar on the neck of the glass flask in such a way that the other screws on the collar lie exactly opposite the spout cap (pos.
Page 6
Chapter 2 – Commissioning Place the adapter cover (pos. c) and the spout cover cap (pos. d) on the cover. Insert the handle cover (pos. e) and the small hook (pos. f) on the end of the handle end so that they snap closed.
Before commissioning Cleaning the distilling chamber Although the distilling chamber of the MELAdest 65 has been cleaned with the greatest of care, manufacturing, packaging and dispatch procedures could result in the presence of harmless residues of various substances. As a result, the distilled water produced during initial commissioning could assume an undesired odour.
Chapter 3 – Operation and care Chapter 3 – Operation and care Producing distilled water DANGER! The water is very hot. Steam can be emitted from the upper section. Danger of burns. Never remove the upper section if the ventilator motor is running. ...
Dry the inside of the distilling chamber with a cloth to prevent corrosion. ® The conductivity meter MELAtest 60 from MELAG can be used to check the conductivity of the water thus produced (aqua dest). Cleaning the distilling chamber Before cleaning the water distilling chamber, please observe the following: Clean the inside of the distilling chamber with lukewarm tap water and a sponge to remove the ...
Chapter 4 – Malfunctions Chapter 4 – Malfunctions Incident Possible cause What you can do No distilled water is produced The mains plug is not in the Check the mains plug mains socket Mains socket is defective Check the electricity supply on the mains socket Upper section connector cable is Connect the connection cable to...
MELAtest 60, conductivity meter (for checking water quality) 01060 MELAdest 65 housing lower section 65410 MELAdest 65 housing upper section 65420 MELAdest 65 cover seal (for housing upper section) 65510 Technical Data ® Model name MELAdest Exterior dimensions of the water distiller (Ø x H) Ø...
Page 12
MELAG Medizintechnik oHG Geneststraße 6-10 10829 Berlin Germany E-Mail: info@melag.de Web: www.melag.de Responsible for content: Technical Office Subject to technical alterations Your stockist:...
Need help?
Do you have a question about the MELAdest 65 and is the answer not in the manual?
Questions and answers