LoRaMote
USER GUIDE
WIRELESS, SENSING and TIMING PRODUCTS
The schematic of the LoRaMote is displayed below. The full design details of the LoRaMote (schematic,
layout, BOM) are available upon request.
Figure 2: LoRaMote Schematics
The LoRaMote can either be supplied with a 9V alkaline battery of through the USB connector. The
internal circuitry is however powered at 3.3V. The power switch allows to user to select whether the board
is powered from the USB or from the battery. When both a battery and the USB connector are power
supplied, the switch is rendered useless and both positions will keep the LoRaMote active.
Revision 2.0 – July 2014
Page 5 of 23
www.semtech.com
©2014 Semtech Corporation