AEG AGS58800S0 User Manual page 14

14 www.aeg.com
7.5 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
4mm
44mm
x
Do the following steps:
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
x
Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge.
2
1
Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge
is 44 mm.
The lower hinge cover (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen fur-
niture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
Open the door. Put the lower hinge cov-
er in position.