PHD 2260X Owner's Manual & Installation Manual page 7

SPEAKER CONNECTIONS
This
single channel (bridged/mono) operation is 4 or 8 ohms. Trichannel power is referred to
stereo and mono at the same time. Minimum impedance remains the same for three channel
(front /subwoofer) systems as long as proper passive crossovers are used. Connect right
have the positive wire from the speaker connected to the positive speaker terminal of the
moving out of phase which causes bass cancellation. See Fig.3 Speaker Output Connections.
CHANNELSPEAKER WIRING DIAGRAM (PHD 2260X)
1 SPEAKER BRIDGED
2 SPEAKER STEREO
1 CH
2 - 4 Ohm
3 SPEAKER TRI MODE
1 CH
4 - 8 Ohm
3 CH
4 - 8 Ohm
1CH
2 CH
2 CH
4 - 8 Ohm
WOOFER 2CH+1CH
FIG.3
-9-
2CHANNEL SYSTEM WIRING DIAGRAM (PHD 2260X)
2
GNDREM B+
CH1 CH2
CAR STEREO HEAD UNIT
-6-
FIG.2